lshal
Public
Actions

Authored By

	Matias Ferrini (oberonking)
	Nov 13 2013, 1:56 PM

Size

131 KB

Subscribers

None

lshal
View Options


	Dumping 124 device(s) from the Global Device List:
	-------------------------------------------------
	udi = '/org/freedesktop/Hal/devices/computer'
	info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
	info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
	info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
	info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
	info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
	info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
	info.capabilities = {'cpufreq_control'} (string list)
	info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
	info.product = 'Computer' (string)
	info.subsystem = 'unknown' (string)
	info.udi = '/org/freedesktop/Hal/devices/computer' (string)
	org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
	org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
	org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
	org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
	power_management.acpi.linux.version = '20080926' (string)
	power_management.can_hibernate = true (bool)
	power_management.can_suspend = true (bool)
	power_management.can_suspend_hybrid = false (bool)
	power_management.is_powersave_set = false (bool)
	power_management.quirk.vbe_post = true (bool)
	power_management.type = 'acpi' (string)
	system.board.product = 'M2NPV-VM' (string)
	system.board.serial = '123456789000' (string)
	system.board.vendor = 'ASUSTek Computer INC.' (string)
	system.board.version = '1.xx' (string)
	system.chassis.manufacturer = 'Chassis Manufacture' (string)
	system.chassis.type = 'Desktop' (string)
	system.firmware.release_date = '09/20/2007' (string)
	system.firmware.vendor = 'Phoenix Technologies, LTD' (string)
	system.firmware.version = 'ASUS M2NPV-VM ACPI BIOS Revision 1201' (string)
	system.formfactor = 'desktop' (string)
	system.hardware.primary_video.product = 1025 (0x401) (int)
	system.hardware.primary_video.vendor = 4318 (0x10de) (int)
	system.hardware.product = 'System Product Name' (string)
	system.hardware.serial = 'System Serial Number' (string)
	system.hardware.uuid = 'C0D7E853-6E99-DB11-8D3D-001731B17DD2' (string)
	system.hardware.vendor = 'System manufacturer' (string)
	system.hardware.version = 'System Version' (string)
	system.kernel.machine = 'x86_64' (string)
	system.kernel.name = 'Linux' (string)
	system.kernel.version = '2.6.28-15-generic' (string)
	system.kernel.version.major = 2 (0x2) (int)
	system.kernel.version.micro = 28 (0x1c) (int)
	system.kernel.version.minor = 6 (0x6) (int)

	udi = '/org/freedesktop/Hal/devices/net_86_22_84_bd_af_0a'
	info.capabilities = {'net', 'net.bridge'} (string list)
	info.category = 'net.bridge' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Bridge Interface' (string)
	info.subsystem = 'net' (string)
	info.udi = '/org/freedesktop/Hal/devices/net_86_22_84_bd_af_0a' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'net' (string)
	linux.sysfs_path = '/sys/devices/virtual/net/pan0' (string)
	net.address = '86:22:84:bd:af:0a' (string)
	net.arp_proto_hw_id = 1 (0x1) (int)
	net.bridge.mac_address = 147482814033674 (0x862284bdaf0a) (uint64)
	net.interface = 'pan0' (string)
	net.linux.ifindex = 3 (0x3) (int)
	net.originating_device = '/org/freedesktop/Hal/devices/computer' (string)

	udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
	access_control.file = '/dev/snd/timer' (string)
	access_control.type = 'sound' (string)
	alsa.device_file = '/dev/snd/timer' (string)
	alsa.type = 'timer' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'alsa', 'access_control'} (string list)
	info.category = 'alsa' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'ALSA Timer Device' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string)
	linux.device_file = '/dev/snd/timer' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string)

	udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
	access_control.file = '/dev/sequencer2' (string)
	access_control.type = 'sound' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'oss', 'access_control'} (string list)
	info.category = 'oss' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'OSS Sequencer Device' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string)
	linux.device_file = '/dev/sequencer2' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string)
	oss.device_file = '/dev/sequencer2' (string)
	oss.type = 'sequencer' (string)

	udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
	access_control.file = '/dev/sequencer' (string)
	access_control.type = 'sound' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'oss', 'access_control'} (string list)
	info.category = 'oss' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'OSS Sequencer Device' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string)
	linux.device_file = '/dev/sequencer' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string)
	oss.device_file = '/dev/sequencer' (string)
	oss.type = 'sequencer' (string)

	udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
	access_control.file = '/dev/snd/seq' (string)
	access_control.type = 'sound' (string)
	alsa.device_file = '/dev/snd/seq' (string)
	alsa.type = 'sequencer' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'alsa', 'access_control'} (string list)
	info.category = 'alsa' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'ALSA Sequencer Device' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string)
	linux.device_file = '/dev/snd/seq' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string)

	udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
	access_control.file = '/dev/input/event2' (string)
	access_control.type = 'mouse' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
	info.category = 'input' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Macintosh mouse button emulation' (string)
	info.subsystem = 'input' (string)
	info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string)
	input.device = '/dev/input/event2' (string)
	input.product = 'Macintosh mouse button emulation' (string)
	input.x11_driver = 'evdev' (string)
	linux.device_file = '/dev/input/event2' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'input' (string)
	linux.sysfs_path = '/sys/devices/virtual/input/input2/event2' (string)

	udi = '/org/freedesktop/Hal/devices/acpi_FAN'
	fan.enabled = true (bool)
	info.capabilities = {'fan'} (string list)
	info.category = 'fan' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Fan' (string)
	info.udi = '/org/freedesktop/Hal/devices/acpi_FAN' (string)
	linux.acpi_path = '/proc/acpi/fan/FAN' (string)
	linux.acpi_type = 2 (0x2) (int)
	linux.hotplug_type = 4 (0x4) (int)

	udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
	info.capabilities = {'processor'} (string list)
	info.category = 'processor' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'AMD Athlon(tm) 64 X2 Dual Core Processor 4600+' (string)
	info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string)
	linux.acpi_path = '/proc/acpi/processor/CPU0' (string)
	linux.acpi_type = 1 (0x1) (int)
	linux.hotplug_type = 4 (0x4) (int)
	processor.can_throttle = false (bool)
	processor.number = 0 (0x0) (int)

	udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
	info.capabilities = {'processor'} (string list)
	info.category = 'processor' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'AMD Athlon(tm) 64 X2 Dual Core Processor 4600+' (string)
	info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string)
	linux.acpi_path = '/proc/acpi/processor/CPU1' (string)
	linux.acpi_type = 1 (0x1) (int)
	linux.hotplug_type = 4 (0x4) (int)
	processor.can_throttle = false (bool)
	processor.number = 1 (0x1) (int)

	udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
	info.capabilities = {'net', 'net.loopback'} (string list)
	info.category = 'net.loopback' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Loopback device Interface' (string)
	info.subsystem = 'net' (string)
	info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'net' (string)
	linux.sysfs_path = '/sys/devices/virtual/net/lo' (string)
	net.address = '00:00:00:00:00:00' (string)
	net.arp_proto_hw_id = 772 (0x304) (int)
	net.interface = 'lo' (string)
	net.linux.ifindex = 1 (0x1) (int)
	net.originating_device = '/org/freedesktop/Hal/devices/computer' (string)

	udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
	button.has_state = false (bool)
	button.type = 'power' (string)
	info.addons.singleton = {'hald-addon-input'} (string list)
	info.capabilities = {'input', 'button'} (string list)
	info.category = 'input' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Power Button (CM)' (string)
	info.subsystem = 'input' (string)
	info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
	input.device = '/dev/input/event1' (string)
	input.product = 'Power Button (CM)' (string)
	linux.device_file = '/dev/input/event1' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'input' (string)
	linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1' (string)

	udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
	button.has_state = false (bool)
	button.type = 'power' (string)
	info.addons.singleton = {'hald-addon-input'} (string list)
	info.capabilities = {'input', 'button'} (string list)
	info.category = 'input' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Power Button (FF)' (string)
	info.subsystem = 'input' (string)
	info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
	input.device = '/dev/input/event0' (string)
	input.product = 'Power Button (FF)' (string)
	linux.device_file = '/dev/input/event0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'input' (string)
	linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
	info.linux.driver = 'system' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'System Board' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:0e' (string)
	pnp.description = 'System Board' (string)
	pnp.id = 'PNP0c01' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
	info.linux.driver = 'system' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:0d' (string)
	pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
	pnp.id = 'PNP0c02' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
	info.linux.driver = 'i8042 kbd' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string)
	pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
	pnp.id = 'PNP0303' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0400'
	info.linux.driver = 'parport_pc' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Standard LPT printer port' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0400' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string)
	pnp.description = 'Standard LPT printer port' (string)
	pnp.id = 'PNP0400' (string)

	udi = '/org/freedesktop/Hal/devices/ppdev_parport0'
	access_control.file = '/dev/parport0' (string)
	access_control.type = 'ppdev' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'ppdev', 'access_control'} (string list)
	info.category = 'ppdev' (string)
	info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0400' (string)
	info.product = 'Parallel Port Device' (string)
	info.subsystem = 'ppdev' (string)
	info.udi = '/org/freedesktop/Hal/devices/ppdev_parport0' (string)
	linux.device_file = '/dev/parport0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'ppdev' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:0b/ppdev/parport0' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
	info.linux.driver = 'serial' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = '16550A-compatible COM port' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
	pnp.description = '16550A-compatible COM port' (string)
	pnp.id = 'PNP0501' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1'
	access_control.file = '/dev/ttyS1' (string)
	access_control.type = 'modem' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'serial', 'access_control'} (string list)
	info.category = 'serial' (string)
	info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string)
	info.product = '16550A-compatible COM port' (string)
	info.subsystem = 'tty' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1' (string)
	linux.device_file = '/dev/ttyS1' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'tty' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:0a/tty/ttyS1' (string)
	serial.device = '/dev/ttyS1' (string)
	serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string)
	serial.port = 1 (0x1) (int)
	serial.type = 'platform' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
	info.linux.driver = 'serial' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = '16550A-compatible COM port' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:09' (string)
	pnp.description = '16550A-compatible COM port' (string)
	pnp.id = 'PNP0501' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
	access_control.file = '/dev/ttyS0' (string)
	access_control.type = 'modem' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'serial', 'access_control'} (string list)
	info.category = 'serial' (string)
	info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string)
	info.product = '16550A-compatible COM port' (string)
	info.subsystem = 'tty' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0' (string)
	linux.device_file = '/dev/ttyS0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'tty' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:09/tty/ttyS0' (string)
	serial.device = '/dev/ttyS0' (string)
	serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string)
	serial.port = 0 (0x0) (int)
	serial.type = 'platform' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'PC standard floppy disk controller' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
	pnp.description = 'PC standard floppy disk controller' (string)
	pnp.id = 'PNP0700' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Math Coprocessor' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:07' (string)
	pnp.description = 'Math Coprocessor' (string)
	pnp.id = 'PNP0c04' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'AT-style speaker sound' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
	pnp.description = 'AT-style speaker sound' (string)
	pnp.id = 'PNP0800' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
	info.linux.driver = 'rtc_cmos' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'AT Real-Time Clock' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
	pnp.description = 'AT Real-Time Clock' (string)
	pnp.id = 'PNP0b00' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'PnP Device (PNP0103)' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:04' (string)
	pnp.id = 'PNP0103' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'AT DMA Controller' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
	pnp.description = 'AT DMA Controller' (string)
	pnp.id = 'PNP0200' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
	info.linux.driver = 'system' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:02' (string)
	pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
	pnp.id = 'PNP0c02' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
	info.linux.driver = 'system' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:01' (string)
	pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
	pnp.id = 'PNP0c02' (string)

	udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'PnP Device (PNP0a08)' (string)
	info.subsystem = 'pnp' (string)
	info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pnp' (string)
	linux.sysfs_path = '/sys/devices/pnp0/00:00' (string)
	pnp.id = 'PNP0a08' (string)

	udi = '/org/freedesktop/Hal/devices/platform_serial8250'
	info.linux.driver = 'serial8250' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Platform Device (serial8250)' (string)
	info.subsystem = 'platform' (string)
	info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'platform' (string)
	linux.sysfs_path = '/sys/devices/platform/serial8250' (string)
	platform.id = 'serial8250' (string)

	udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
	info.linux.driver = 'pcspkr' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Platform Device (pcspkr)' (string)
	info.subsystem = 'platform' (string)
	info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'platform' (string)
	linux.sysfs_path = '/sys/devices/platform/pcspkr' (string)
	platform.id = 'pcspkr' (string)

	udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
	info.capabilities = {'input'} (string list)
	info.category = 'input' (string)
	info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
	info.product = 'PC Speaker' (string)
	info.subsystem = 'input' (string)
	info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string)
	input.device = '/dev/input/event6' (string)
	input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
	input.product = 'PC Speaker' (string)
	linux.device_file = '/dev/input/event6' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'input' (string)
	linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input6/event6' (string)

	udi = '/org/freedesktop/Hal/devices/platform_i8042'
	info.linux.driver = 'i8042' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Platform Device (i8042)' (string)
	info.subsystem = 'platform' (string)
	info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'platform' (string)
	linux.sysfs_path = '/sys/devices/platform/i8042' (string)
	platform.id = 'i8042' (string)

	udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
	info.linux.driver = 'atkbd' (string)
	info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
	info.product = 'i8042 KBD port' (string)
	info.subsystem = 'serio' (string)
	info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'serio' (string)
	linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string)
	serio.description = 'i8042 KBD port' (string)
	serio.id = 'serio0' (string)

	udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
	info.addons.singleton = {'hald-addon-input'} (string list)
	info.callouts.add = {'debian-setup-keyboard'} (string list)
	info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
	info.category = 'input' (string)
	info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
	info.product = 'AT Translated Set 2 keyboard' (string)
	info.subsystem = 'input' (string)
	info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string)
	input.device = '/dev/input/event3' (string)
	input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
	input.product = 'AT Translated Set 2 keyboard' (string)
	input.x11_driver = 'evdev' (string)
	input.xkb.layout = 'es' (string)
	input.xkb.model = 'pc105' (string)
	input.xkb.rules = 'evdev' (string)
	linux.device_file = '/dev/input/event3' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'input' (string)
	linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input3/event3' (string)

	udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Platform Device (floppy.0)' (string)
	info.subsystem = 'platform' (string)
	info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'platform' (string)
	linux.sysfs_path = '/sys/devices/platform/floppy.0' (string)
	platform.id = 'floppy.0' (string)

	udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy'
	access_control.file = '/dev/fd0' (string)
	access_control.type = 'floppy' (string)
	block.device = '/dev/fd0' (string)
	block.is_volume = false (bool)
	block.major = 2 (0x2) (int)
	block.minor = 0 (0x0) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy' (string)
	info.addons = {'hald-addon-storage'} (string list)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'storage', 'block', 'access_control'} (string list)
	info.category = 'storage' (string)
	info.interfaces = {'org.freedesktop.Hal.Device.Volume', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
	info.parent = '/org/freedesktop/Hal/devices/platform_floppy_0' (string)
	info.product = 'PC Floppy Drive' (string)
	info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy' (string)
	info.vendor = '' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/platform/floppy.0/block/fd0' (string)
	org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
	org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
	storage.automount_enabled_hint = true (bool)
	storage.bus = 'platform' (string)
	storage.drive_type = 'floppy' (string)
	storage.hotpluggable = false (bool)
	storage.media_check_enabled = false (bool)
	storage.model = '' (string)
	storage.no_partitions_hint = true (bool)
	storage.originating_device = '/org/freedesktop/Hal/devices/platform_floppy_0' (string)
	storage.removable = true (bool)
	storage.removable.media_available = false (bool)
	storage.requires_eject = false (bool)
	storage.size = 0 (0x0) (uint64)
	storage.vendor = 'PC Floppy Drive' (string)
	volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'uid='} (string list)

	udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'Platform Device (Fixed MDIO bus.0)' (string)
	info.subsystem = 'platform' (string)
	info.udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'platform' (string)
	linux.sysfs_path = '/sys/devices/platform/Fixed MDIO bus.0' (string)
	platform.id = 'Fixed MDIO bus.0' (string)

	udi = '/org/freedesktop/Hal/devices/pci_1022_1103'
	info.linux.driver = 'k8temp' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'K8 [Athlon64/Opteron] Miscellaneous Control' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_1022_1103' (string)
	info.vendor = 'Advanced Micro Devices [AMD]' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string)
	pci.device_class = 6 (0x6) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string)
	pci.product = 'K8 [Athlon64/Opteron] Miscellaneous Control' (string)
	pci.product_id = 4355 (0x1103) (int)
	pci.subsys_product_id = 0 (0x0) (int)
	pci.subsys_vendor_id = 0 (0x0) (int)
	pci.vendor = 'Advanced Micro Devices [AMD]' (string)
	pci.vendor_id = 4130 (0x1022) (int)

	udi = '/org/freedesktop/Hal/devices/pci_1022_1102'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'K8 [Athlon64/Opteron] DRAM Controller' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_1022_1102' (string)
	info.vendor = 'Advanced Micro Devices [AMD]' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string)
	pci.device_class = 6 (0x6) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string)
	pci.product = 'K8 [Athlon64/Opteron] DRAM Controller' (string)
	pci.product_id = 4354 (0x1102) (int)
	pci.subsys_product_id = 0 (0x0) (int)
	pci.subsys_vendor_id = 0 (0x0) (int)
	pci.vendor = 'Advanced Micro Devices [AMD]' (string)
	pci.vendor_id = 4130 (0x1022) (int)

	udi = '/org/freedesktop/Hal/devices/pci_1022_1101'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'K8 [Athlon64/Opteron] Address Map' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_1022_1101' (string)
	info.vendor = 'Advanced Micro Devices [AMD]' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string)
	pci.device_class = 6 (0x6) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string)
	pci.product = 'K8 [Athlon64/Opteron] Address Map' (string)
	pci.product_id = 4353 (0x1101) (int)
	pci.subsys_product_id = 0 (0x0) (int)
	pci.subsys_vendor_id = 0 (0x0) (int)
	pci.vendor = 'Advanced Micro Devices [AMD]' (string)
	pci.vendor_id = 4130 (0x1022) (int)

	udi = '/org/freedesktop/Hal/devices/pci_1022_1100'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_1022_1100' (string)
	info.vendor = 'Advanced Micro Devices [AMD]' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string)
	pci.device_class = 6 (0x6) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string)
	pci.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' (string)
	pci.product_id = 4352 (0x1100) (int)
	pci.subsys_product_id = 0 (0x0) (int)
	pci.subsys_vendor_id = 0 (0x0) (int)
	pci.vendor = 'Advanced Micro Devices [AMD]' (string)
	pci.vendor_id = 4130 (0x1022) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_269'
	info.linux.driver = 'forcedeth' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'MCP51 Ethernet Controller' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_269' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0' (string)
	pci.device_class = 6 (0x6) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 128 (0x80) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0' (string)
	pci.product = 'MCP51 Ethernet Controller' (string)
	pci.product_id = 617 (0x269) (int)
	pci.subsys_product_id = 33130 (0x816a) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/net_00_1a_92_9d_63_0f'
	info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
	info.category = 'net.80203' (string)
	info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_269' (string)
	info.product = 'Networking Interface' (string)
	info.subsystem = 'net' (string)
	info.udi = '/org/freedesktop/Hal/devices/net_00_1a_92_9d_63_0f' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'net' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0/net/eth0' (string)
	net.80203.mac_address = 114128937743 (0x1a929d630f) (uint64)
	net.address = '00:1a:92:9d:63:0f' (string)
	net.arp_proto_hw_id = 1 (0x1) (int)
	net.interface = 'eth0' (string)
	net.linux.ifindex = 2 (0x2) (int)
	net.originating_device = '/org/freedesktop/Hal/devices/pci_10de_269' (string)
	org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
	org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
	org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
	org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26c'
	info.linux.driver = 'HDA Intel' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'MCP51 High Definition Audio' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1' (string)
	pci.device_class = 4 (0x4) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 3 (0x3) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1' (string)
	pci.product = 'MCP51 High Definition Audio' (string)
	pci.product_id = 620 (0x26c) (int)
	pci.subsys_product_id = 33227 (0x81cb) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0'
	info.capabilities = {'sound'} (string list)
	info.category = 'sound' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c' (string)
	info.product = 'HDA NVidia Sound Card' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0' (string)
	sound.card = 0 (0x0) (int)
	sound.card_id = 'HDA NVidia' (string)
	sound.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_playback_1'
	access_control.file = '/dev/snd/pcmC0D1p' (string)
	access_control.type = 'sound' (string)
	alsa.card = 0 (0x0) (int)
	alsa.card_id = 'HDA NVidia' (string)
	alsa.device = 1 (0x1) (int)
	alsa.device_file = '/dev/snd/pcmC0D1p' (string)
	alsa.device_id = 'AD198x Digital' (string)
	alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	alsa.pcm_class = 'generic' (string)
	alsa.type = 'playback' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'alsa', 'access_control'} (string list)
	info.category = 'alsa' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	info.product = 'AD198x Digital ALSA Playback Device' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_playback_1' (string)
	linux.device_file = '/dev/snd/pcmC0D1p' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/pcmC0D1p' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_playback_0'
	access_control.file = '/dev/snd/pcmC0D0p' (string)
	access_control.type = 'sound' (string)
	alsa.card = 0 (0x0) (int)
	alsa.card_id = 'HDA NVidia' (string)
	alsa.device = 0 (0x0) (int)
	alsa.device_file = '/dev/snd/pcmC0D0p' (string)
	alsa.device_id = 'AD198x Analog' (string)
	alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	alsa.pcm_class = 'generic' (string)
	alsa.type = 'playback' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'alsa', 'access_control'} (string list)
	info.category = 'alsa' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	info.product = 'AD198x Analog ALSA Playback Device' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_playback_0' (string)
	linux.device_file = '/dev/snd/pcmC0D0p' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/pcmC0D0p' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_capture_0'
	access_control.file = '/dev/snd/pcmC0D0c' (string)
	access_control.type = 'sound' (string)
	alsa.card = 0 (0x0) (int)
	alsa.card_id = 'HDA NVidia' (string)
	alsa.device = 0 (0x0) (int)
	alsa.device_file = '/dev/snd/pcmC0D0c' (string)
	alsa.device_id = 'AD198x Analog' (string)
	alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	alsa.pcm_class = 'generic' (string)
	alsa.type = 'capture' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'alsa', 'access_control'} (string list)
	info.category = 'alsa' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	info.product = 'AD198x Analog ALSA Capture Device' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_capture_0' (string)
	linux.device_file = '/dev/snd/pcmC0D0c' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/pcmC0D0c' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_mixer__1'
	access_control.file = '/dev/mixer' (string)
	access_control.type = 'sound' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'oss', 'access_control'} (string list)
	info.category = 'oss' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	info.product = 'AD198x Analog OSS Control Device' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_mixer__1' (string)
	linux.device_file = '/dev/mixer' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/mixer' (string)
	oss.card = 0 (0x0) (int)
	oss.card_id = 'HDA NVidia' (string)
	oss.device_file = '/dev/mixer' (string)
	oss.device_id = 'AD198x Analog' (string)
	oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	oss.type = 'mixer' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_pcm_0_0'
	access_control.file = '/dev/dsp' (string)
	access_control.type = 'sound' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'oss', 'access_control'} (string list)
	info.category = 'oss' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	info.product = 'AD198x Analog OSS PCM Device' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_pcm_0_0' (string)
	linux.device_file = '/dev/dsp' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/dsp' (string)
	oss.card = 0 (0x0) (int)
	oss.card_id = 'HDA NVidia' (string)
	oss.device = 0 (0x0) (int)
	oss.device_file = '/dev/dsp' (string)
	oss.device_id = 'AD198x Analog' (string)
	oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	oss.type = 'pcm' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_control__1'
	access_control.file = '/dev/snd/controlC0' (string)
	access_control.type = 'sound' (string)
	alsa.card = 0 (0x0) (int)
	alsa.card_id = 'HDA NVidia' (string)
	alsa.device_file = '/dev/snd/controlC0' (string)
	alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	alsa.type = 'control' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'alsa', 'access_control'} (string list)
	info.category = 'alsa' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	info.product = 'HDA NVidia ALSA Control Device' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_control__1' (string)
	linux.device_file = '/dev/snd/controlC0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/controlC0' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_pcm_0'
	access_control.file = '/dev/audio' (string)
	access_control.type = 'sound' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'oss', 'access_control'} (string list)
	info.category = 'oss' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	info.product = 'AD198x Analog OSS PCM Device' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_pcm_0' (string)
	linux.device_file = '/dev/audio' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/audio' (string)
	oss.card = 0 (0x0) (int)
	oss.card_id = 'HDA NVidia' (string)
	oss.device = 0 (0x0) (int)
	oss.device_file = '/dev/audio' (string)
	oss.device_id = 'AD198x Analog' (string)
	oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	oss.type = 'pcm' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_pcm_1'
	access_control.file = '/dev/adsp' (string)
	access_control.type = 'sound' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'oss', 'access_control'} (string list)
	info.category = 'oss' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	info.product = 'AD198x Analog OSS PCM Device' (string)
	info.subsystem = 'sound' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_pcm_1' (string)
	linux.device_file = '/dev/adsp' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'sound' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/adsp' (string)
	oss.card = 0 (0x0) (int)
	oss.card_id = 'HDA NVidia' (string)
	oss.device = 1 (0x1) (int)
	oss.device_file = '/dev/adsp' (string)
	oss.device_id = 'AD198x Analog' (string)
	oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string)
	oss.type = 'pcm' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26f'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'MCP51 PCI Bridge' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26f' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0' (string)
	pci.device_class = 6 (0x6) (int)
	pci.device_protocol = 1 (0x1) (int)
	pci.device_subclass = 4 (0x4) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0' (string)
	pci.product = 'MCP51 PCI Bridge' (string)
	pci.product_id = 623 (0x26f) (int)
	pci.subsys_product_id = 0 (0x0) (int)
	pci.subsys_vendor_id = 0 (0x0) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_104c_8023'
	info.linux.driver = 'ohci1394' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_26f' (string)
	info.product = 'TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_104c_8023' (string)
	info.vendor = 'Texas Instruments' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/0000:02:05.0' (string)
	pci.device_class = 12 (0xc) (int)
	pci.device_protocol = 16 (0x10) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/0000:02:05.0' (string)
	pci.product = 'TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)' (string)
	pci.product_id = 32803 (0x8023) (int)
	pci.subsys_product_id = 32907 (0x808b) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'Texas Instruments' (string)
	pci.vendor_id = 4172 (0x104c) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_267'
	info.linux.driver = 'sata_nv' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'MCP51 Serial ATA Controller' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_267' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0' (string)
	pci.device_class = 1 (0x1) (int)
	pci.device_protocol = 133 (0x85) (int)
	pci.device_subclass = 1 (0x1) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0' (string)
	pci.product = 'MCP51 Serial ATA Controller' (string)
	pci.product_id = 615 (0x267) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_0'
	info.capabilities = {'scsi_host'} (string list)
	info.category = 'scsi_host' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_267' (string)
	info.product = 'SCSI Host Adapter' (string)
	info.subsystem = 'scsi_host' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_host' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host3' (string)
	scsi_host.host = 3 (0x3) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_0_scsi_host'
	info.capabilities = {'scsi_host'} (string list)
	info.category = 'scsi_host' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_0' (string)
	info.product = 'SCSI Host Adapter' (string)
	info.subsystem = 'scsi_host' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_0_scsi_host' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_host' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host3/scsi_host/host3' (string)
	scsi_host.host = 3 (0x3) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_0_scsi_device_lun0'
	info.linux.driver = 'sr' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_0' (string)
	info.product = 'SCSI Device' (string)
	info.subsystem = 'scsi' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_0_scsi_device_lun0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host3/target3:0:0/3:0:0:0' (string)
	scsi.bus = 0 (0x0) (int)
	scsi.host = 3 (0x3) (int)
	scsi.lun = 0 (0x0) (int)
	scsi.model = 'DVD-RAM GH22NS30' (string)
	scsi.target = 0 (0x0) (int)
	scsi.type = 'cdrom' (string)
	scsi.vendor = 'HL-DT-ST' (string)

	udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RAM_GH22NS30'
	access_control.file = '/dev/sr0' (string)
	access_control.type = 'cdrom' (string)
	block.device = '/dev/sr0' (string)
	block.is_volume = false (bool)
	block.major = 11 (0xb) (int)
	block.minor = 0 (0x0) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_RAM_GH22NS30' (string)
	info.addons = {'hald-addon-storage'} (string list)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list)
	info.category = 'storage' (string)
	info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_0_scsi_device_lun0' (string)
	info.product = 'DVD-RAM GH22NS30' (string)
	info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RAM_GH22NS30' (string)
	info.vendor = 'HL-DT-ST' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host3/target3:0:0/3:0:0:0/block/sr0' (string)
	org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
	org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
	org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
	org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
	storage.automount_enabled_hint = true (bool)
	storage.bus = 'pci' (string)
	storage.cdrom.bd = false (bool)
	storage.cdrom.bdr = false (bool)
	storage.cdrom.bdre = false (bool)
	storage.cdrom.cdr = true (bool)
	storage.cdrom.cdrw = true (bool)
	storage.cdrom.dvd = true (bool)
	storage.cdrom.dvdplusr = true (bool)
	storage.cdrom.dvdplusrdl = true (bool)
	storage.cdrom.dvdplusrw = true (bool)
	storage.cdrom.dvdplusrwdl = false (bool)
	storage.cdrom.dvdr = true (bool)
	storage.cdrom.dvdram = true (bool)
	storage.cdrom.dvdrdl = true (bool)
	storage.cdrom.dvdrw = true (bool)
	storage.cdrom.hddvd = false (bool)
	storage.cdrom.hddvdr = false (bool)
	storage.cdrom.hddvdrw = false (bool)
	storage.cdrom.mo = false (bool)
	storage.cdrom.mrw = true (bool)
	storage.cdrom.mrw_w = true (bool)
	storage.cdrom.read_speed = 8468 (0x2114) (int)
	storage.cdrom.support_media_changed = true (bool)
	storage.cdrom.support_multisession = true (bool)
	storage.cdrom.write_speed = 8468 (0x2114) (int)
	storage.cdrom.write_speeds = {'8468', '7056', '4234', '2822'} (string list)
	storage.drive_type = 'cdrom' (string)
	storage.firmware_version = '1.02' (string)
	storage.hotpluggable = false (bool)
	storage.lun = 0 (0x0) (int)
	storage.media_check_enabled = true (bool)
	storage.model = 'DVD-RAM GH22NS30' (string)
	storage.no_partitions_hint = true (bool)
	storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
	storage.partitioning_scheme = '' (string)
	storage.removable = true (bool)
	storage.removable.media_available = false (bool)
	storage.removable.support_async_notification = false (bool)
	storage.requires_eject = true (bool)
	storage.size = 0 (0x0) (uint64)
	storage.vendor = 'HL-DT-ST' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_0_scsi_device_lun0_scsi_generic'
	access_control.file = '/dev/sg3' (string)
	access_control.type = 'cdrom' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'scsi_generic', 'access_control'} (string list)
	info.category = 'scsi_generic' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_0_scsi_device_lun0' (string)
	info.product = 'SCSI Generic Interface' (string)
	info.subsystem = 'scsi_generic' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_0_scsi_device_lun0_scsi_generic' (string)
	linux.device_file = '/dev/sg3' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_generic' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host3/target3:0:0/3:0:0:0/scsi_generic/sg3' (string)
	scsi_generic.device = '/dev/sg3' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host'
	info.capabilities = {'scsi_host'} (string list)
	info.category = 'scsi_host' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_267' (string)
	info.product = 'SCSI Host Adapter' (string)
	info.subsystem = 'scsi_host' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_host' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host2' (string)
	scsi_host.host = 2 (0x2) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_scsi_host'
	info.capabilities = {'scsi_host'} (string list)
	info.category = 'scsi_host' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host' (string)
	info.product = 'SCSI Host Adapter' (string)
	info.subsystem = 'scsi_host' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_scsi_host' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_host' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host2/scsi_host/host2' (string)
	scsi_host.host = 2 (0x2) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_scsi_device_lun0'
	info.linux.driver = 'sd' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host' (string)
	info.product = 'SCSI Device' (string)
	info.subsystem = 'scsi' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_scsi_device_lun0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host2/target2:0:0/2:0:0:0' (string)
	scsi.bus = 0 (0x0) (int)
	scsi.host = 2 (0x2) (int)
	scsi.lun = 0 (0x0) (int)
	scsi.model = 'WDC WD800JD-00LS' (string)
	scsi.target = 0 (0x0) (int)
	scsi.type = 'disk' (string)
	scsi.vendor = 'ATA' (string)

	udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD800JD_00L_WD_WMAM9AL57739'
	block.device = '/dev/sdc' (string)
	block.is_volume = false (bool)
	block.major = 8 (0x8) (int)
	block.minor = 32 (0x20) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD800JD_00L_WD_WMAM9AL57739' (string)
	info.capabilities = {'storage', 'block'} (string list)
	info.category = 'storage' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_scsi_device_lun0' (string)
	info.product = 'WDC WD800JD-00LS' (string)
	info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD800JD_00L_WD_WMAM9AL57739' (string)
	info.vendor = 'ATA' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host2/target2:0:0/2:0:0:0/block/sdc' (string)
	storage.automount_enabled_hint = false (bool)
	storage.bus = 'pci' (string)
	storage.drive_type = 'disk' (string)
	storage.firmware_version = '06.0' (string)
	storage.hotpluggable = false (bool)
	storage.lun = 0 (0x0) (int)
	storage.media_check_enabled = false (bool)
	storage.model = 'WDC WD800JD-00LS' (string)
	storage.no_partitions_hint = false (bool)
	storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
	storage.partitioning_scheme = 'mbr' (string)
	storage.removable = false (bool)
	storage.removable.media_available = true (bool)
	storage.removable.media_size = 80026361856 (0x12a1f16000) (uint64)
	storage.requires_eject = false (bool)
	storage.serial = 'SATA_WDC_WD800JD-00L_WD-WMAM9AL57739' (string)
	storage.size = 80026361856 (0x12a1f16000) (uint64)
	storage.vendor = 'ATA' (string)

	udi = '/org/freedesktop/Hal/devices/volume_uuid_0bd72bf0_3cb0_489b_9189_203f147f93cc'
	block.device = '/dev/sdc1' (string)
	block.is_volume = true (bool)
	block.major = 8 (0x8) (int)
	block.minor = 33 (0x21) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD800JD_00L_WD_WMAM9AL57739' (string)
	info.capabilities = {'volume', 'block'} (string list)
	info.category = 'volume' (string)
	info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
	info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD800JD_00L_WD_WMAM9AL57739' (string)
	info.product = 'Backs' (string)
	info.udi = '/org/freedesktop/Hal/devices/volume_uuid_0bd72bf0_3cb0_489b_9189_203f147f93cc' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host2/target2:0:0/2:0:0:0/block/sdc/sdc1' (string)
	org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
	org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
	volume.block_size = 512 (0x200) (int)
	volume.fstype = 'ext4' (string)
	volume.fsusage = 'filesystem' (string)
	volume.fsversion = '1.0' (string)
	volume.ignore = false (bool)
	volume.is_disc = false (bool)
	volume.is_mounted = true (bool)
	volume.is_mounted_read_only = false (bool)
	volume.is_partition = true (bool)
	volume.label = 'Backs' (string)
	volume.linux.is_device_mapper = false (bool)
	volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
	volume.mount_point = '/media/Backs' (string)
	volume.num_blocks = 156296322 (0x950e482) (uint64)
	volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64)
	volume.partition.number = 1 (0x1) (int)
	volume.partition.start = 32256 (0x7e00) (uint64)
	volume.size = 80023716864 (0x12a1c90400) (uint64)
	volume.unmount.valid_options = {'lazy'} (string list)
	volume.uuid = '0bd72bf0-3cb0-489b-9189-203f147f93cc' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_scsi_device_lun0_scsi_generic'
	info.capabilities = {'scsi_generic'} (string list)
	info.category = 'scsi_generic' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_scsi_device_lun0' (string)
	info.product = 'SCSI Generic Interface' (string)
	info.subsystem = 'scsi_generic' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_267_scsi_host_scsi_device_lun0_scsi_generic' (string)
	linux.device_file = '/dev/sg2' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_generic' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host2/target2:0:0/2:0:0:0/scsi_generic/sg2' (string)
	scsi_generic.device = '/dev/sg2' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_266'
	info.linux.driver = 'sata_nv' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'MCP51 Serial ATA Controller' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_266' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0' (string)
	pci.device_class = 1 (0x1) (int)
	pci.device_protocol = 133 (0x85) (int)
	pci.device_subclass = 1 (0x1) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0' (string)
	pci.product = 'MCP51 Serial ATA Controller' (string)
	pci.product_id = 614 (0x266) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0'
	info.capabilities = {'scsi_host'} (string list)
	info.category = 'scsi_host' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_266' (string)
	info.product = 'SCSI Host Adapter' (string)
	info.subsystem = 'scsi_host' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_host' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host1' (string)
	scsi_host.host = 1 (0x1) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0_scsi_host'
	info.capabilities = {'scsi_host'} (string list)
	info.category = 'scsi_host' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0' (string)
	info.product = 'SCSI Host Adapter' (string)
	info.subsystem = 'scsi_host' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0_scsi_host' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_host' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host1/scsi_host/host1' (string)
	scsi_host.host = 1 (0x1) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0_scsi_device_lun0'
	info.linux.driver = 'sd' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0' (string)
	info.product = 'SCSI Device' (string)
	info.subsystem = 'scsi' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0_scsi_device_lun0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host1/target1:0:0/1:0:0:0' (string)
	scsi.bus = 0 (0x0) (int)
	scsi.host = 1 (0x1) (int)
	scsi.lun = 0 (0x0) (int)
	scsi.model = 'SAMSUNG HD403LJ' (string)
	scsi.target = 0 (0x0) (int)
	scsi.type = 'disk' (string)
	scsi.vendor = 'ATA' (string)

	udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD403LJS0NFJDWQ316194'
	block.device = '/dev/sdb' (string)
	block.is_volume = false (bool)
	block.major = 8 (0x8) (int)
	block.minor = 16 (0x10) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD403LJS0NFJDWQ316194' (string)
	info.capabilities = {'storage', 'block'} (string list)
	info.category = 'storage' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0_scsi_device_lun0' (string)
	info.product = 'SAMSUNG HD403LJ' (string)
	info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD403LJS0NFJDWQ316194' (string)
	info.vendor = 'ATA' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host1/target1:0:0/1:0:0:0/block/sdb' (string)
	storage.automount_enabled_hint = false (bool)
	storage.bus = 'pci' (string)
	storage.drive_type = 'disk' (string)
	storage.firmware_version = 'CT10' (string)
	storage.hotpluggable = false (bool)
	storage.lun = 0 (0x0) (int)
	storage.media_check_enabled = false (bool)
	storage.model = 'SAMSUNG HD403LJ' (string)
	storage.no_partitions_hint = false (bool)
	storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
	storage.partitioning_scheme = 'mbr' (string)
	storage.removable = false (bool)
	storage.removable.media_available = true (bool)
	storage.removable.media_size = 400088457216 (0x5d27216000) (uint64)
	storage.requires_eject = false (bool)
	storage.serial = 'SATA_SAMSUNG_HD403LJS0NFJDWQ316194' (string)
	storage.size = 400088457216 (0x5d27216000) (uint64)
	storage.vendor = 'ATA' (string)

	udi = '/org/freedesktop/Hal/devices/volume_uuid_B6CC7936CC78F24B'
	block.device = '/dev/sdb2' (string)
	block.is_volume = true (bool)
	block.major = 8 (0x8) (int)
	block.minor = 18 (0x12) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD403LJS0NFJDWQ316194' (string)
	info.capabilities = {'volume', 'block'} (string list)
	info.category = 'volume' (string)
	info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
	info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD403LJS0NFJDWQ316194' (string)
	info.product = 'C3PO' (string)
	info.udi = '/org/freedesktop/Hal/devices/volume_uuid_B6CC7936CC78F24B' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host1/target1:0:0/1:0:0:0/block/sdb/sdb2' (string)
	org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
	org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
	volume.block_size = 512 (0x200) (int)
	volume.fstype = 'ntfs-3g' (string)
	volume.fstype.alternative = 'ntfs' (string)
	volume.fsusage = 'filesystem' (string)
	volume.fsversion = '3.1' (string)
	volume.ignore = false (bool)
	volume.is_disc = false (bool)
	volume.is_mounted = true (bool)
	volume.is_mounted_read_only = false (bool)
	volume.is_partition = true (bool)
	volume.label = 'C3PO' (string)
	volume.linux.is_device_mapper = false (bool)
	volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list)
	volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list)
	volume.mount_point = '/media/c3po' (string)
	volume.num_blocks = 257136390 (0xf539706) (uint64)
	volume.partition.media_size = 400088457216 (0x5d27216000) (uint64)
	volume.partition.number = 2 (0x2) (int)
	volume.partition.start = 268432012800 (0x3e7fcb7600) (uint64)
	volume.policy.mount_filesystem = 'ntfs-3g' (string)
	volume.size = 131653831680 (0x1ea72e0c00) (uint64)
	volume.unmount.ntfs.valid_options = {'lazy'} (string list)
	volume.unmount.valid_options = {'lazy'} (string list)
	volume.uuid = 'B6CC7936CC78F24B' (string)

	udi = '/org/freedesktop/Hal/devices/volume_uuid_e91b6d96_680b_4c30_92dc_057cac078149'
	block.device = '/dev/sdb1' (string)
	block.is_volume = true (bool)
	block.major = 8 (0x8) (int)
	block.minor = 17 (0x11) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD403LJS0NFJDWQ316194' (string)
	info.capabilities = {'volume', 'block'} (string list)
	info.category = 'volume' (string)
	info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
	info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD403LJS0NFJDWQ316194' (string)
	info.product = 'datos' (string)
	info.udi = '/org/freedesktop/Hal/devices/volume_uuid_e91b6d96_680b_4c30_92dc_057cac078149' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host1/target1:0:0/1:0:0:0/block/sdb/sdb1' (string)
	org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
	org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
	volume.block_size = 512 (0x200) (int)
	volume.fstype = 'ext3' (string)
	volume.fsusage = 'filesystem' (string)
	volume.fsversion = '1.0' (string)
	volume.ignore = false (bool)
	volume.is_disc = false (bool)
	volume.is_mounted = true (bool)
	volume.is_mounted_read_only = false (bool)
	volume.is_partition = true (bool)
	volume.label = 'datos' (string)
	volume.linux.is_device_mapper = false (bool)
	volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
	volume.mount_point = '/media/datos' (string)
	volume.num_blocks = 524281212 (0x1f3fe57c) (uint64)
	volume.partition.media_size = 400088457216 (0x5d27216000) (uint64)
	volume.partition.number = 1 (0x1) (int)
	volume.partition.start = 32256 (0x7e00) (uint64)
	volume.size = 268431980544 (0x3e7fcaf800) (uint64)
	volume.unmount.valid_options = {'lazy'} (string list)
	volume.uuid = 'e91b6d96-680b-4c30-92dc-057cac078149' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0_scsi_device_lun0_scsi_generic'
	info.capabilities = {'scsi_generic'} (string list)
	info.category = 'scsi_generic' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0_scsi_device_lun0' (string)
	info.product = 'SCSI Generic Interface' (string)
	info.subsystem = 'scsi_generic' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0_scsi_device_lun0_scsi_generic' (string)
	linux.device_file = '/dev/sg1' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_generic' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host1/target1:0:0/1:0:0:0/scsi_generic/sg1' (string)
	scsi_generic.device = '/dev/sg1' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host'
	info.capabilities = {'scsi_host'} (string list)
	info.category = 'scsi_host' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_266' (string)
	info.product = 'SCSI Host Adapter' (string)
	info.subsystem = 'scsi_host' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_host' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0' (string)
	scsi_host.host = 0 (0x0) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_host'
	info.capabilities = {'scsi_host'} (string list)
	info.category = 'scsi_host' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host' (string)
	info.product = 'SCSI Host Adapter' (string)
	info.subsystem = 'scsi_host' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_host' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_host' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/scsi_host/host0' (string)
	scsi_host.host = 0 (0x0) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_device_lun0'
	info.linux.driver = 'sd' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host' (string)
	info.product = 'SCSI Device' (string)
	info.subsystem = 'scsi' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_device_lun0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0' (string)
	scsi.bus = 0 (0x0) (int)
	scsi.host = 0 (0x0) (int)
	scsi.lun = 0 (0x0) (int)
	scsi.model = 'WDC WD1600AABS-0' (string)
	scsi.target = 0 (0x0) (int)
	scsi.type = 'disk' (string)
	scsi.vendor = 'ATA' (string)

	udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696'
	block.device = '/dev/sda' (string)
	block.is_volume = false (bool)
	block.major = 8 (0x8) (int)
	block.minor = 0 (0x0) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.capabilities = {'storage', 'block'} (string list)
	info.category = 'storage' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_device_lun0' (string)
	info.product = 'WDC WD1600AABS-0' (string)
	info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.vendor = 'ATA' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda' (string)
	storage.automount_enabled_hint = false (bool)
	storage.bus = 'pci' (string)
	storage.drive_type = 'disk' (string)
	storage.firmware_version = '05.0' (string)
	storage.hotpluggable = false (bool)
	storage.lun = 0 (0x0) (int)
	storage.media_check_enabled = false (bool)
	storage.model = 'WDC WD1600AABS-0' (string)
	storage.no_partitions_hint = false (bool)
	storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
	storage.partitioning_scheme = 'mbr' (string)
	storage.removable = false (bool)
	storage.removable.media_available = true (bool)
	storage.removable.media_size = 160041885696 (0x25433d6000) (uint64)
	storage.requires_eject = false (bool)
	storage.serial = 'SATA_WDC_WD1600AABS-_WD-WMAP92704696' (string)
	storage.size = 160041885696 (0x25433d6000) (uint64)
	storage.vendor = 'ATA' (string)

	udi = '/org/freedesktop/Hal/devices/volume_part3_size_1024'
	block.device = '/dev/sda3' (string)
	block.is_volume = true (bool)
	block.major = 8 (0x8) (int)
	block.minor = 3 (0x3) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.capabilities = {'volume', 'block'} (string list)
	info.category = 'volume' (string)
	info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.product = 'Volume' (string)
	info.udi = '/org/freedesktop/Hal/devices/volume_part3_size_1024' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda3' (string)
	volume.block_size = 512 (0x200) (int)
	volume.fstype = '' (string)
	volume.fsusage = 'partitiontable' (string)
	volume.fsversion = '' (string)
	volume.is_disc = false (bool)
	volume.is_mounted = false (bool)
	volume.is_mounted_read_only = false (bool)
	volume.is_partition = true (bool)
	volume.label = '' (string)
	volume.linux.is_device_mapper = false (bool)
	volume.mount_point = '' (string)
	volume.num_blocks = 2 (0x2) (uint64)
	volume.partition.flags = {} (string list)
	volume.partition.label = '' (string)
	volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
	volume.partition.number = 3 (0x3) (int)
	volume.partition.scheme = 'mbr' (string)
	volume.partition.start = 28533496320 (0x6a4ba9a00) (uint64)
	volume.partition.type = '0x05' (string)
	volume.partition.uuid = '' (string)
	volume.size = 1024 (0x400) (uint64)
	volume.uuid = '' (string)

	udi = '/org/freedesktop/Hal/devices/volume_uuid_cb71fbda_da0f_4208_a47a_5a5c8dbdf834'
	block.device = '/dev/sda7' (string)
	block.is_volume = true (bool)
	block.major = 8 (0x8) (int)
	block.minor = 7 (0x7) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.capabilities = {'volume', 'block'} (string list)
	info.category = 'volume' (string)
	info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
	info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.product = 'fotos' (string)
	info.udi = '/org/freedesktop/Hal/devices/volume_uuid_cb71fbda_da0f_4208_a47a_5a5c8dbdf834' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda7' (string)
	org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
	org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
	volume.block_size = 512 (0x200) (int)
	volume.fstype = 'ext3' (string)
	volume.fsusage = 'filesystem' (string)
	volume.fsversion = '1.0' (string)
	volume.ignore = false (bool)
	volume.is_disc = false (bool)
	volume.is_mounted = true (bool)
	volume.is_mounted_read_only = false (bool)
	volume.is_partition = true (bool)
	volume.label = 'fotos' (string)
	volume.linux.is_device_mapper = false (bool)
	volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
	volume.mount_point = '/media/fotos' (string)
	volume.num_blocks = 20964762 (0x13fe59a) (uint64)
	volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
	volume.partition.number = 7 (0x7) (int)
	volume.partition.start = 149305314816 (0x22c34a4e00) (uint64)
	volume.size = 10733958144 (0x27fcb3400) (uint64)
	volume.unmount.valid_options = {'lazy'} (string list)
	volume.uuid = 'cb71fbda-da0f-4208-a47a-5a5c8dbdf834' (string)

	udi = '/org/freedesktop/Hal/devices/volume_uuid_ea22564b_6cf6_465d_a4df_1a07dae84070'
	block.device = '/dev/sda6' (string)
	block.is_volume = true (bool)
	block.major = 8 (0x8) (int)
	block.minor = 6 (0x6) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.capabilities = {'volume', 'block'} (string list)
	info.category = 'volume' (string)
	info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
	info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.product = 'Volume (ext3)' (string)
	info.udi = '/org/freedesktop/Hal/devices/volume_uuid_ea22564b_6cf6_465d_a4df_1a07dae84070' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda6' (string)
	org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
	org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
	volume.block_size = 512 (0x200) (int)
	volume.fstype = 'ext3' (string)
	volume.fsusage = 'filesystem' (string)
	volume.fsversion = '1.0' (string)
	volume.ignore = false (bool)
	volume.is_disc = false (bool)
	volume.is_mounted = true (bool)
	volume.is_mounted_read_only = false (bool)
	volume.is_partition = true (bool)
	volume.label = '' (string)
	volume.linux.is_device_mapper = false (bool)
	volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
	volume.mount_point = '/home' (string)
	volume.num_blocks = 233793882 (0xdef695a) (uint64)
	volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
	volume.partition.number = 6 (0x6) (int)
	volume.partition.start = 29602814976 (0x6e4771c00) (uint64)
	volume.size = 119702467584 (0x1bded2b400) (uint64)
	volume.unmount.valid_options = {'lazy'} (string list)
	volume.uuid = 'ea22564b-6cf6-465d-a4df-1a07dae84070' (string)

	udi = '/org/freedesktop/Hal/devices/volume_uuid_95f8f502_4786_4810_a8cb_4b59beb57320'
	block.device = '/dev/sda5' (string)
	block.is_volume = true (bool)
	block.major = 8 (0x8) (int)
	block.minor = 5 (0x5) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.capabilities = {'volume', 'block'} (string list)
	info.category = 'volume' (string)
	info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.product = 'Volume (swap)' (string)
	info.udi = '/org/freedesktop/Hal/devices/volume_uuid_95f8f502_4786_4810_a8cb_4b59beb57320' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda5' (string)
	volume.block_size = 512 (0x200) (int)
	volume.fstype = 'swap' (string)
	volume.fsusage = 'other' (string)
	volume.fsversion = '2' (string)
	volume.is_disc = false (bool)
	volume.is_mounted = false (bool)
	volume.is_mounted_read_only = false (bool)
	volume.is_partition = true (bool)
	volume.label = '' (string)
	volume.linux.is_device_mapper = false (bool)
	volume.mount_point = '' (string)
	volume.num_blocks = 2088387 (0x1fddc3) (uint64)
	volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
	volume.partition.number = 5 (0x5) (int)
	volume.partition.start = 28533528576 (0x6a4bb1800) (uint64)
	volume.size = 1069254144 (0x3fbb8600) (uint64)
	volume.uuid = '95f8f502-4786-4810-a8cb-4b59beb57320' (string)

	udi = '/org/freedesktop/Hal/devices/volume_uuid_f3571708_7c56_4928_a128_607c8368eb0d'
	block.device = '/dev/sda2' (string)
	block.is_volume = true (bool)
	block.major = 8 (0x8) (int)
	block.minor = 2 (0x2) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.capabilities = {'volume', 'block'} (string list)
	info.category = 'volume' (string)
	info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
	info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.product = 'Volume (ext4)' (string)
	info.udi = '/org/freedesktop/Hal/devices/volume_uuid_f3571708_7c56_4928_a128_607c8368eb0d' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda2' (string)
	org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
	org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
	volume.block_size = 512 (0x200) (int)
	volume.fstype = 'ext4' (string)
	volume.fsusage = 'filesystem' (string)
	volume.fsversion = '1.0' (string)
	volume.ignore = false (bool)
	volume.is_disc = false (bool)
	volume.is_mounted = true (bool)
	volume.is_mounted_read_only = false (bool)
	volume.is_partition = true (bool)
	volume.label = '' (string)
	volume.linux.is_device_mapper = false (bool)
	volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
	volume.mount_point = '/' (string)
	volume.num_blocks = 38957625 (0x2527239) (uint64)
	volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
	volume.partition.number = 2 (0x2) (int)
	volume.partition.start = 8587192320 (0x1ffd62800) (uint64)
	volume.size = 19946304000 (0x4a4e47200) (uint64)
	volume.unmount.valid_options = {'lazy'} (string list)
	volume.uuid = 'f3571708-7c56-4928-a128-607c8368eb0d' (string)

	udi = '/org/freedesktop/Hal/devices/volume_uuid_4038EF6E38EF6200'
	block.device = '/dev/sda1' (string)
	block.is_volume = true (bool)
	block.major = 8 (0x8) (int)
	block.minor = 1 (0x1) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.capabilities = {'volume', 'block'} (string list)
	info.category = 'volume' (string)
	info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
	info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD1600AABS__WD_WMAP92704696' (string)
	info.product = 'Volume (ntfs)' (string)
	info.udi = '/org/freedesktop/Hal/devices/volume_uuid_4038EF6E38EF6200' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda1' (string)
	org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
	org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
	volume.block_size = 512 (0x200) (int)
	volume.fstype = 'ntfs-3g' (string)
	volume.fstype.alternative = 'ntfs' (string)
	volume.fsusage = 'filesystem' (string)
	volume.fsversion = '3.1' (string)
	volume.ignore = false (bool)
	volume.is_disc = false (bool)
	volume.is_mounted = false (bool)
	volume.is_mounted_read_only = false (bool)
	volume.is_partition = true (bool)
	volume.label = '' (string)
	volume.linux.is_device_mapper = false (bool)
	volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list)
	volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list)
	volume.mount_point = '' (string)
	volume.num_blocks = 16771797 (0xffead5) (uint64)
	volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
	volume.partition.number = 1 (0x1) (int)
	volume.partition.start = 32256 (0x7e00) (uint64)
	volume.policy.mount_filesystem = 'ntfs-3g' (string)
	volume.size = 8587160064 (0x1ffd5aa00) (uint64)
	volume.unmount.ntfs.valid_options = {'lazy'} (string list)
	volume.unmount.valid_options = {'lazy'} (string list)
	volume.uuid = '4038EF6E38EF6200' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_device_lun0_scsi_generic'
	info.capabilities = {'scsi_generic'} (string list)
	info.category = 'scsi_generic' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_device_lun0' (string)
	info.product = 'SCSI Generic Interface' (string)
	info.subsystem = 'scsi_generic' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_device_lun0_scsi_generic' (string)
	linux.device_file = '/dev/sg0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_generic' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0' (string)
	scsi_generic.device = '/dev/sg0' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_265'
	info.linux.driver = 'pata_amd' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'MCP51 IDE' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_265' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0' (string)
	pci.device_class = 1 (0x1) (int)
	pci.device_protocol = 138 (0x8a) (int)
	pci.device_subclass = 1 (0x1) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0' (string)
	pci.product = 'MCP51 IDE' (string)
	pci.product_id = 613 (0x265) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_0'
	info.capabilities = {'scsi_host'} (string list)
	info.category = 'scsi_host' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_265' (string)
	info.product = 'SCSI Host Adapter' (string)
	info.subsystem = 'scsi_host' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_host' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host5/scsi_host/host5' (string)
	scsi_host.host = 5 (0x5) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host'
	info.capabilities = {'scsi_host'} (string list)
	info.category = 'scsi_host' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_265' (string)
	info.product = 'SCSI Host Adapter' (string)
	info.subsystem = 'scsi_host' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_host' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host4' (string)
	scsi_host.host = 4 (0x4) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_host'
	info.capabilities = {'scsi_host'} (string list)
	info.category = 'scsi_host' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host' (string)
	info.product = 'SCSI Host Adapter' (string)
	info.subsystem = 'scsi_host' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_host' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_host' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host4/scsi_host/host4' (string)
	scsi_host.host = 4 (0x4) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_device_lun0'
	info.linux.driver = 'sd' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host' (string)
	info.product = 'SCSI Device' (string)
	info.subsystem = 'scsi' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_device_lun0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host4/target4:0:0/4:0:0:0' (string)
	scsi.bus = 0 (0x0) (int)
	scsi.host = 4 (0x4) (int)
	scsi.lun = 0 (0x0) (int)
	scsi.model = 'HDS728080PLAT20' (string)
	scsi.target = 0 (0x0) (int)
	scsi.type = 'disk' (string)
	scsi.vendor = 'ATA' (string)

	udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_HDS728080PLAT20_PFD215S4SUPBBM'
	block.device = '/dev/sdd' (string)
	block.is_volume = false (bool)
	block.major = 8 (0x8) (int)
	block.minor = 48 (0x30) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_HDS728080PLAT20_PFD215S4SUPBBM' (string)
	info.capabilities = {'storage', 'block'} (string list)
	info.category = 'storage' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_device_lun0' (string)
	info.product = 'HDS728080PLAT20' (string)
	info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_HDS728080PLAT20_PFD215S4SUPBBM' (string)
	info.vendor = 'ATA' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host4/target4:0:0/4:0:0:0/block/sdd' (string)
	storage.automount_enabled_hint = false (bool)
	storage.bus = 'pci' (string)
	storage.drive_type = 'disk' (string)
	storage.firmware_version = 'PF2O' (string)
	storage.hotpluggable = false (bool)
	storage.lun = 0 (0x0) (int)
	storage.media_check_enabled = false (bool)
	storage.model = 'HDS728080PLAT20' (string)
	storage.no_partitions_hint = false (bool)
	storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
	storage.partitioning_scheme = 'mbr' (string)
	storage.removable = false (bool)
	storage.removable.media_available = true (bool)
	storage.removable.media_size = 82348277760 (0x132c570000) (uint64)
	storage.requires_eject = false (bool)
	storage.serial = 'SATA_HDS728080PLAT20_PFD215S4SUPBBM' (string)
	storage.size = 82348277760 (0x132c570000) (uint64)
	storage.vendor = 'ATA' (string)

	udi = '/org/freedesktop/Hal/devices/volume_uuid_460B_E792'
	block.device = '/dev/sdd1' (string)
	block.is_volume = true (bool)
	block.major = 8 (0x8) (int)
	block.minor = 49 (0x31) (int)
	block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_HDS728080PLAT20_PFD215S4SUPBBM' (string)
	info.capabilities = {'volume', 'block'} (string list)
	info.category = 'volume' (string)
	info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
	info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_HDS728080PLAT20_PFD215S4SUPBBM' (string)
	info.product = 'MUSICA' (string)
	info.udi = '/org/freedesktop/Hal/devices/volume_uuid_460B_E792' (string)
	linux.hotplug_type = 3 (0x3) (int)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host4/target4:0:0/4:0:0:0/block/sdd/sdd1' (string)
	org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
	org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
	org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
	volume.block_size = 512 (0x200) (int)
	volume.fstype = 'vfat' (string)
	volume.fsusage = 'filesystem' (string)
	volume.fsversion = 'FAT32' (string)
	volume.ignore = false (bool)
	volume.is_disc = false (bool)
	volume.is_mounted = true (bool)
	volume.is_mounted_read_only = false (bool)
	volume.is_partition = true (bool)
	volume.label = 'MUSICA' (string)
	volume.linux.is_device_mapper = false (bool)
	volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid=', 'flush'} (string list)
	volume.mount_point = '/media/musica' (string)
	volume.num_blocks = 160826652 (0x996051c) (uint64)
	volume.partition.media_size = 82348277760 (0x132c570000) (uint64)
	volume.partition.number = 1 (0x1) (int)
	volume.partition.start = 32256 (0x7e00) (uint64)
	volume.size = 82343245824 (0x132c0a3800) (uint64)
	volume.unmount.valid_options = {'lazy'} (string list)
	volume.uuid = '460B-E792' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_device_lun0_scsi_generic'
	info.capabilities = {'scsi_generic'} (string list)
	info.category = 'scsi_generic' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_device_lun0' (string)
	info.product = 'SCSI Generic Interface' (string)
	info.subsystem = 'scsi_generic' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_device_lun0_scsi_generic' (string)
	linux.device_file = '/dev/sg4' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'scsi_generic' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host4/target4:0:0/4:0:0:0/scsi_generic/sg4' (string)
	scsi_generic.device = '/dev/sg4' (string)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26e'
	info.linux.driver = 'ehci_hcd' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'MCP51 USB Controller' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26e' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1' (string)
	pci.device_class = 12 (0xc) (int)
	pci.device_protocol = 32 (0x20) (int)
	pci.device_subclass = 3 (0x3) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1' (string)
	pci.product = 'MCP51 USB Controller' (string)
	pci.product_id = 622 (0x26e) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_0b_1'
	info.linux.driver = 'usb' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_26e' (string)
	info.product = '2.0 root hub' (string)
	info.subsystem = 'usb_device' (string)
	info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_0b_1' (string)
	info.vendor = 'Linux Foundation' (string)
	linux.device_file = '/dev/bus/usb/001/001' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'usb' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1' (string)
	usb_device.bus_number = 1 (0x1) (int)
	usb_device.can_wake_up = true (bool)
	usb_device.configuration_value = 1 (0x1) (int)
	usb_device.device_class = 9 (0x9) (int)
	usb_device.device_protocol = 0 (0x0) (int)
	usb_device.device_revision_bcd = 518 (0x206) (int)
	usb_device.device_subclass = 0 (0x0) (int)
	usb_device.is_self_powered = true (bool)
	usb_device.linux.device_number = 1 (0x1) (int)
	usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1' (string)
	usb_device.max_power = 0 (0x0) (int)
	usb_device.num_configurations = 1 (0x1) (int)
	usb_device.num_interfaces = 1 (0x1) (int)
	usb_device.num_ports = 8 (0x8) (int)
	usb_device.product = '2.0 root hub' (string)
	usb_device.product_id = 2 (0x2) (int)
	usb_device.serial = '0000:00:0b.1' (string)
	usb_device.speed = 480.0 (480) (double)
	usb_device.vendor = 'Linux Foundation' (string)
	usb_device.vendor_id = 7531 (0x1d6b) (int)
	usb_device.version = 2.0 (2) (double)

	udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_0b_1_if0'
	info.linux.driver = 'hub' (string)
	info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_0b_1' (string)
	info.product = 'USB Hub Interface' (string)
	info.subsystem = 'usb' (string)
	info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_0b_1_if0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'usb' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-0:1.0' (string)
	usb.bus_number = 1 (0x1) (int)
	usb.can_wake_up = true (bool)
	usb.configuration_value = 1 (0x1) (int)
	usb.device_class = 9 (0x9) (int)
	usb.device_protocol = 0 (0x0) (int)
	usb.device_revision_bcd = 518 (0x206) (int)
	usb.device_subclass = 0 (0x0) (int)
	usb.interface.class = 9 (0x9) (int)
	usb.interface.number = 0 (0x0) (int)
	usb.interface.protocol = 0 (0x0) (int)
	usb.interface.subclass = 0 (0x0) (int)
	usb.is_self_powered = true (bool)
	usb.linux.device_number = 1 (0x1) (int)
	usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-0:1.0' (string)
	usb.max_power = 0 (0x0) (int)
	usb.num_configurations = 1 (0x1) (int)
	usb.num_interfaces = 1 (0x1) (int)
	usb.num_ports = 8 (0x8) (int)
	usb.product = 'USB Hub Interface' (string)
	usb.product_id = 2 (0x2) (int)
	usb.serial = '0000:00:0b.1' (string)
	usb.speed = 480.0 (480) (double)
	usb.vendor = 'Linux Foundation' (string)
	usb.vendor_id = 7531 (0x1d6b) (int)
	usb.version = 2.0 (2) (double)

	udi = '/org/freedesktop/Hal/devices/pci_10de_26d'
	info.linux.driver = 'ohci_hcd' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'MCP51 USB Controller' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_26d' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string)
	pci.device_class = 12 (0xc) (int)
	pci.device_protocol = 16 (0x10) (int)
	pci.device_subclass = 3 (0x3) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string)
	pci.product = 'MCP51 USB Controller' (string)
	pci.product_id = 621 (0x26d) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0'
	info.linux.driver = 'usb' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_26d' (string)
	info.product = '1.1 root hub' (string)
	info.subsystem = 'usb_device' (string)
	info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0' (string)
	info.vendor = 'Linux Foundation' (string)
	linux.device_file = '/dev/bus/usb/002/001' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'usb' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2' (string)
	usb_device.bus_number = 2 (0x2) (int)
	usb_device.can_wake_up = true (bool)
	usb_device.configuration_value = 1 (0x1) (int)
	usb_device.device_class = 9 (0x9) (int)
	usb_device.device_protocol = 0 (0x0) (int)
	usb_device.device_revision_bcd = 518 (0x206) (int)
	usb_device.device_subclass = 0 (0x0) (int)
	usb_device.is_self_powered = true (bool)
	usb_device.linux.device_number = 1 (0x1) (int)
	usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2' (string)
	usb_device.max_power = 0 (0x0) (int)
	usb_device.num_configurations = 1 (0x1) (int)
	usb_device.num_interfaces = 1 (0x1) (int)
	usb_device.num_ports = 8 (0x8) (int)
	usb_device.product = '1.1 root hub' (string)
	usb_device.product_id = 1 (0x1) (int)
	usb_device.serial = '0000:00:0b.0' (string)
	usb_device.speed = 12.0 (12) (double)
	usb_device.vendor = 'Linux Foundation' (string)
	usb_device.vendor_id = 7531 (0x1d6b) (int)
	usb_device.version = 1.1 (1.1) (double)

	udi = '/org/freedesktop/Hal/devices/usb_device_172f_38_noserial'
	info.linux.driver = 'usb' (string)
	info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0' (string)
	info.product = 'stylus' (string)
	info.subsystem = 'usb_device' (string)
	info.udi = '/org/freedesktop/Hal/devices/usb_device_172f_38_noserial' (string)
	info.vendor = ' WALTOP' (string)
	input.x11_driver = 'wacom' (string)
	input.x11_options.BottomX = '17679' (string)
	input.x11_options.BottomY = '10686' (string)
	input.x11_options.TopX = '21' (string)
	input.x11_options.TopY = '21' (string)
	input.x11_options.Type = 'stylus' (string)
	linux.device_file = '/dev/bus/usb/002/003' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'usb' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-4' (string)
	usb_device.bus_number = 2 (0x2) (int)
	usb_device.can_wake_up = false (bool)
	usb_device.configuration_value = 1 (0x1) (int)
	usb_device.device_class = 0 (0x0) (int)
	usb_device.device_protocol = 0 (0x0) (int)
	usb_device.device_revision_bcd = 257 (0x101) (int)
	usb_device.device_subclass = 0 (0x0) (int)
	usb_device.is_self_powered = false (bool)
	usb_device.linux.device_number = 3 (0x3) (int)
	usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-4' (string)
	usb_device.max_power = 100 (0x64) (int)
	usb_device.num_configurations = 1 (0x1) (int)
	usb_device.num_interfaces = 1 (0x1) (int)
	usb_device.num_ports = 0 (0x0) (int)
	usb_device.product = ' Tablet' (string)
	usb_device.product_id = 56 (0x38) (int)
	usb_device.speed = 12.0 (12) (double)
	usb_device.vendor = ' WALTOP' (string)
	usb_device.vendor_id = 5935 (0x172f) (int)
	usb_device.version = 1.1 (1.1) (double)

	udi = '/org/freedesktop/Hal/devices/usb_device_172f_38_noserial_if0'
	info.linux.driver = 'usbhid' (string)
	info.parent = '/org/freedesktop/Hal/devices/usb_device_172f_38_noserial' (string)
	info.product = 'USB HID Interface' (string)
	info.subsystem = 'usb' (string)
	info.udi = '/org/freedesktop/Hal/devices/usb_device_172f_38_noserial_if0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'usb' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0' (string)
	usb.bus_number = 2 (0x2) (int)
	usb.can_wake_up = false (bool)
	usb.configuration_value = 1 (0x1) (int)
	usb.device_class = 0 (0x0) (int)
	usb.device_protocol = 0 (0x0) (int)
	usb.device_revision_bcd = 257 (0x101) (int)
	usb.device_subclass = 0 (0x0) (int)
	usb.interface.class = 3 (0x3) (int)
	usb.interface.number = 0 (0x0) (int)
	usb.interface.protocol = 0 (0x0) (int)
	usb.interface.subclass = 0 (0x0) (int)
	usb.is_self_powered = false (bool)
	usb.linux.device_number = 3 (0x3) (int)
	usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0' (string)
	usb.max_power = 100 (0x64) (int)
	usb.num_configurations = 1 (0x1) (int)
	usb.num_interfaces = 1 (0x1) (int)
	usb.num_ports = 0 (0x0) (int)
	usb.product = 'USB HID Interface' (string)
	usb.product_id = 56 (0x38) (int)
	usb.speed = 12.0 (12) (double)
	usb.vendor = ' WALTOP' (string)
	usb.vendor_id = 5935 (0x172f) (int)
	usb.version = 1.1 (1.1) (double)

	udi = '/org/freedesktop/Hal/devices/usb_device_172f_38_noserial_if0_logicaldev_input'
	access_control.file = '/dev/input/event5' (string)
	access_control.type = 'mouse' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'input', 'input.mouse', 'input.tablet', 'access_control'} (string list)
	info.category = 'input' (string)
	info.parent = '/org/freedesktop/Hal/devices/usb_device_172f_38_noserial_if0' (string)
	info.product = 'stylus' (string)
	info.subsystem = 'input' (string)
	info.udi = '/org/freedesktop/Hal/devices/usb_device_172f_38_noserial_if0_logicaldev_input' (string)
	input.device = '/dev/input/event5' (string)
	input.originating_device = '/org/freedesktop/Hal/devices/usb_device_172f_38_noserial_if0' (string)
	input.product = ' WALTOP Tablet' (string)
	input.x11_driver = 'wacom' (string)
	input.x11_options.BottomX = '17679' (string)
	input.x11_options.BottomY = '10686' (string)
	input.x11_options.TopX = '21' (string)
	input.x11_options.TopY = '21' (string)
	input.x11_options.Type = 'stylus' (string)
	linux.device_file = '/dev/input/event5' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'input' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/input/input5/event5' (string)

	udi = '/org/freedesktop/Hal/devices/usb_device_458_3a_noserial'
	info.linux.driver = 'usb' (string)
	info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0' (string)
	info.product = 'Optical Mouse' (string)
	info.subsystem = 'usb_device' (string)
	info.udi = '/org/freedesktop/Hal/devices/usb_device_458_3a_noserial' (string)
	info.vendor = 'KYE Systems Corp. (Mouse Systems)' (string)
	linux.device_file = '/dev/bus/usb/002/002' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'usb' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-3' (string)
	usb_device.bus_number = 2 (0x2) (int)
	usb_device.can_wake_up = true (bool)
	usb_device.configuration = 'HID-compliant MOUSE' (string)
	usb_device.configuration_value = 1 (0x1) (int)
	usb_device.device_class = 0 (0x0) (int)
	usb_device.device_protocol = 0 (0x0) (int)
	usb_device.device_revision_bcd = 256 (0x100) (int)
	usb_device.device_subclass = 0 (0x0) (int)
	usb_device.is_self_powered = false (bool)
	usb_device.linux.device_number = 2 (0x2) (int)
	usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-3' (string)
	usb_device.max_power = 100 (0x64) (int)
	usb_device.num_configurations = 1 (0x1) (int)
	usb_device.num_interfaces = 1 (0x1) (int)
	usb_device.num_ports = 0 (0x0) (int)
	usb_device.product = 'Optical Mouse' (string)
	usb_device.product_id = 58 (0x3a) (int)
	usb_device.speed = 1.5 (1.5) (double)
	usb_device.vendor = 'KYE Systems Corp. (Mouse Systems)' (string)
	usb_device.vendor_id = 1112 (0x458) (int)
	usb_device.version = 1.1 (1.1) (double)

	udi = '/org/freedesktop/Hal/devices/usb_device_458_3a_noserial_if0'
	info.linux.driver = 'usbhid' (string)
	info.parent = '/org/freedesktop/Hal/devices/usb_device_458_3a_noserial' (string)
	info.product = 'USB HID Interface' (string)
	info.subsystem = 'usb' (string)
	info.udi = '/org/freedesktop/Hal/devices/usb_device_458_3a_noserial_if0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'usb' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0' (string)
	usb.bus_number = 2 (0x2) (int)
	usb.can_wake_up = true (bool)
	usb.configuration = 'HID-compliant MOUSE' (string)
	usb.configuration_value = 1 (0x1) (int)
	usb.device_class = 0 (0x0) (int)
	usb.device_protocol = 0 (0x0) (int)
	usb.device_revision_bcd = 256 (0x100) (int)
	usb.device_subclass = 0 (0x0) (int)
	usb.interface.class = 3 (0x3) (int)
	usb.interface.number = 0 (0x0) (int)
	usb.interface.protocol = 2 (0x2) (int)
	usb.interface.subclass = 1 (0x1) (int)
	usb.is_self_powered = false (bool)
	usb.linux.device_number = 2 (0x2) (int)
	usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0' (string)
	usb.max_power = 100 (0x64) (int)
	usb.num_configurations = 1 (0x1) (int)
	usb.num_interfaces = 1 (0x1) (int)
	usb.num_ports = 0 (0x0) (int)
	usb.product = 'USB HID Interface' (string)
	usb.product_id = 58 (0x3a) (int)
	usb.speed = 1.5 (1.5) (double)
	usb.vendor = 'KYE Systems Corp. (Mouse Systems)' (string)
	usb.vendor_id = 1112 (0x458) (int)
	usb.version = 1.1 (1.1) (double)

	udi = '/org/freedesktop/Hal/devices/usb_device_458_3a_noserial_if0_logicaldev_input'
	access_control.file = '/dev/input/event4' (string)
	access_control.type = 'mouse' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
	info.category = 'input' (string)
	info.parent = '/org/freedesktop/Hal/devices/usb_device_458_3a_noserial_if0' (string)
	info.product = 'Genius Optical Mouse' (string)
	info.subsystem = 'input' (string)
	info.udi = '/org/freedesktop/Hal/devices/usb_device_458_3a_noserial_if0_logicaldev_input' (string)
	input.device = '/dev/input/event4' (string)
	input.originating_device = '/org/freedesktop/Hal/devices/usb_device_458_3a_noserial_if0' (string)
	input.product = 'Genius Optical Mouse' (string)
	input.x11_driver = 'evdev' (string)
	linux.device_file = '/dev/input/event4' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'input' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input4/event4' (string)

	udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0_if0'
	info.linux.driver = 'hub' (string)
	info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0' (string)
	info.product = 'USB Hub Interface' (string)
	info.subsystem = 'usb' (string)
	info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0_if0' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'usb' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-0:1.0' (string)
	usb.bus_number = 2 (0x2) (int)
	usb.can_wake_up = true (bool)
	usb.configuration_value = 1 (0x1) (int)
	usb.device_class = 9 (0x9) (int)
	usb.device_protocol = 0 (0x0) (int)
	usb.device_revision_bcd = 518 (0x206) (int)
	usb.device_subclass = 0 (0x0) (int)
	usb.interface.class = 9 (0x9) (int)
	usb.interface.number = 0 (0x0) (int)
	usb.interface.protocol = 0 (0x0) (int)
	usb.interface.subclass = 0 (0x0) (int)
	usb.is_self_powered = true (bool)
	usb.linux.device_number = 1 (0x1) (int)
	usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-0:1.0' (string)
	usb.max_power = 0 (0x0) (int)
	usb.num_configurations = 1 (0x1) (int)
	usb.num_interfaces = 1 (0x1) (int)
	usb.num_ports = 8 (0x8) (int)
	usb.product = 'USB Hub Interface' (string)
	usb.product_id = 1 (0x1) (int)
	usb.serial = '0000:00:0b.0' (string)
	usb.speed = 12.0 (12) (double)
	usb.vendor = 'Linux Foundation' (string)
	usb.vendor_id = 7531 (0x1d6b) (int)
	usb.version = 1.1 (1.1) (double)

	udi = '/org/freedesktop/Hal/devices/pci_10de_272'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'MCP51 Memory Controller 0' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_272' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.2' (string)
	pci.device_class = 5 (0x5) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.2' (string)
	pci.product = 'MCP51 Memory Controller 0' (string)
	pci.product_id = 626 (0x272) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_264'
	info.linux.driver = 'nForce2_smbus' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'MCP51 SMBus' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_264' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.1' (string)
	pci.device_class = 12 (0xc) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 5 (0x5) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.1' (string)
	pci.product = 'MCP51 SMBus' (string)
	pci.product_id = 612 (0x264) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_260'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'MCP51 LPC Bridge' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_260' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0' (string)
	pci.device_class = 6 (0x6) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 1 (0x1) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0' (string)
	pci.product = 'MCP51 LPC Bridge' (string)
	pci.product_id = 608 (0x260) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_270'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'MCP51 Host Bridge' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_270' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string)
	pci.device_class = 5 (0x5) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string)
	pci.product = 'MCP51 Host Bridge' (string)
	pci.product_id = 624 (0x270) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_2fb'
	info.linux.driver = 'pcieport-driver' (string)
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'C51 PCI Express Bridge' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_2fb' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' (string)
	pci.device_class = 6 (0x6) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 4 (0x4) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' (string)
	pci.product = 'C51 PCI Express Bridge' (string)
	pci.product_id = 763 (0x2fb) (int)
	pci.subsys_product_id = 0 (0x0) (int)
	pci.subsys_vendor_id = 0 (0x0) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_401'
	info.linux.driver = 'nvidia' (string)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_2fb' (string)
	info.product = 'GeForce 8600GT' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_401' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/0000:01:00.0' (string)
	pci.device_class = 3 (0x3) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/0000:01:00.0' (string)
	pci.product = 'GeForce 8600GT' (string)
	pci.product_id = 1025 (0x401) (int)
	pci.subsys_product_id = 8838 (0x2286) (int)
	pci.subsys_vendor = 'XFX Pine Group Inc.' (string)
	pci.subsys_vendor_id = 5762 (0x1682) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_27e'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'C51 Memory Controller 2' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_27e' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.7' (string)
	pci.device_class = 5 (0x5) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.7' (string)
	pci.product = 'C51 Memory Controller 2' (string)
	pci.product_id = 638 (0x27e) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_27f'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'C51 Memory Controller 3' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_27f' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.6' (string)
	pci.device_class = 5 (0x5) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.6' (string)
	pci.product = 'C51 Memory Controller 3' (string)
	pci.product_id = 639 (0x27f) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_2ff'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'C51 Host Bridge' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_2ff' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.5' (string)
	pci.device_class = 5 (0x5) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.5' (string)
	pci.product = 'C51 Host Bridge' (string)
	pci.product_id = 767 (0x2ff) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_2f9'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'C51 Memory Controller 4' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_2f9' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.4' (string)
	pci.device_class = 5 (0x5) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.4' (string)
	pci.product = 'C51 Memory Controller 4' (string)
	pci.product_id = 761 (0x2f9) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_2f8'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'C51 Memory Controller 5' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_2f8' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3' (string)
	pci.device_class = 5 (0x5) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3' (string)
	pci.product = 'C51 Memory Controller 5' (string)
	pci.product_id = 760 (0x2f8) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_2fe'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'C51 Memory Controller 1' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_2fe' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.2' (string)
	pci.device_class = 5 (0x5) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.2' (string)
	pci.product = 'C51 Memory Controller 1' (string)
	pci.product_id = 766 (0x2fe) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_2fa'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'C51 Memory Controller 0' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_2fa' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1' (string)
	pci.device_class = 5 (0x5) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1' (string)
	pci.product = 'C51 Memory Controller 0' (string)
	pci.product_id = 762 (0x2fa) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/pci_10de_2f0'
	info.parent = '/org/freedesktop/Hal/devices/computer' (string)
	info.product = 'C51 Host Bridge' (string)
	info.subsystem = 'pci' (string)
	info.udi = '/org/freedesktop/Hal/devices/pci_10de_2f0' (string)
	info.vendor = 'nVidia Corporation' (string)
	linux.hotplug_type = 2 (0x2) (int)
	linux.subsystem = 'pci' (string)
	linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
	pci.device_class = 5 (0x5) (int)
	pci.device_protocol = 0 (0x0) (int)
	pci.device_subclass = 0 (0x0) (int)
	pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
	pci.product = 'C51 Host Bridge' (string)
	pci.product_id = 752 (0x2f0) (int)
	pci.subsys_product_id = 33216 (0x81c0) (int)
	pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
	pci.subsys_vendor_id = 4163 (0x1043) (int)
	pci.vendor = 'nVidia Corporation' (string)
	pci.vendor_id = 4318 (0x10de) (int)

	udi = '/org/freedesktop/Hal/devices/fuse'
	access_control.file = '/dev/fuse' (string)
	access_control.type = 'camera' (string)
	info.callouts.add = {'hal-acl-tool --add-device'} (string list)
	info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
	info.capabilities = {'access_control'} (string list)
	info.parent = '/org/freedesktop/Hal/devices/pci_10de_2f0' (string)
	info.subsystem = 'unknown' (string)
	info.udi = '/org/freedesktop/Hal/devices/fuse' (string)


	Dumped 124 device(s) from the Global Device List.
	------------------------------------------------

File Metadata

Mime Type: text/plain
Storage Engine: local-disk
Storage Format: Raw Data
Storage Handle: 9a/66/3e21ec9334de39058efe00913d11

lshalPublicActions

lshalView Options

File Metadata

Event Timeline

lshal
Public
Actions

lshal
View Options