Differential D2889 Diff 9436 source/blender/makesdna/DNA_object_types.h

Changeset View

Standalone View

source/blender/makesdna/DNA_object_types.h

Show First 20 Lines • Show All 392 Lines • ▼ Show 20 Lines	enum {
OB_SPEAKER = 12,		OB_SPEAKER = 12,
OB_LIGHTPROBE = 13,		OB_LIGHTPROBE = 13,

/* OB_WAVE = 21, */		/* OB_WAVE = 21, */
OB_LATTICE = 22,		OB_LATTICE = 22,

/* 23 and 24 are for life and sector (old file compat.) */		/* 23 and 24 are for life and sector (old file compat.) */
OB_ARMATURE = 25,		OB_ARMATURE = 25,
		/* Grease Pencil object used in 3D view but not used for annotation in 2D */
		OB_GPENCIL = 26,
};		};

/* check if the object type supports materials */		/* check if the object type supports materials */
#define OB_TYPE_SUPPORT_MATERIAL(_type) \		#define OB_TYPE_SUPPORT_MATERIAL(_type) \
((_type) >= OB_MESH && (_type) <= OB_MBALL)		((_type) >= OB_MESH && (_type) <= OB_MBALL)
#define OB_TYPE_SUPPORT_VGROUP(_type) \		#define OB_TYPE_SUPPORT_VGROUP(_type) \
(ELEM(_type, OB_MESH, OB_LATTICE))		(ELEM(_type, OB_MESH, OB_LATTICE, OB_GPENCIL))
#define OB_TYPE_SUPPORT_EDITMODE(_type) \		#define OB_TYPE_SUPPORT_EDITMODE(_type) \
(ELEM(_type, OB_MESH, OB_FONT, OB_CURVE, OB_SURF, OB_MBALL, OB_LATTICE, OB_ARMATURE))		(ELEM(_type, OB_MESH, OB_FONT, OB_CURVE, OB_SURF, OB_MBALL, OB_LATTICE, OB_ARMATURE))
#define OB_TYPE_SUPPORT_PARVERT(_type) \		#define OB_TYPE_SUPPORT_PARVERT(_type) \
(ELEM(_type, OB_MESH, OB_SURF, OB_CURVE, OB_LATTICE))		(ELEM(_type, OB_MESH, OB_SURF, OB_CURVE, OB_LATTICE))

/* is this ID type used as object data */		/* is this ID type used as object data */
#define OB_DATA_SUPPORT_ID(_id_type) \		#define OB_DATA_SUPPORT_ID(_id_type) \
(ELEM(_id_type, ID_ME, ID_CU, ID_MB, ID_LA, ID_SPK, ID_LP, ID_CA, ID_LT, ID_AR))		(ELEM(_id_type, ID_ME, ID_CU, ID_MB, ID_LA, ID_SPK, ID_LP, ID_CA, ID_LT, ID_AR))
▲ Show 20 Lines • Show All 86 Lines • ▼ Show 20 Lines	enum {
OB_CIRCLE = 3,		OB_CIRCLE = 3,
OB_SINGLE_ARROW = 4,		OB_SINGLE_ARROW = 4,
OB_CUBE = 5,		OB_CUBE = 5,
OB_EMPTY_SPHERE = 6,		OB_EMPTY_SPHERE = 6,
OB_EMPTY_CONE = 7,		OB_EMPTY_CONE = 7,
OB_EMPTY_IMAGE = 8,		OB_EMPTY_IMAGE = 8,
};		};

		/* gpencil add types */
		enum {
		GP_EMPTY = 0,
		GP_MONKEY = 1
		};

/* boundtype */		/* boundtype */
enum {		enum {
OB_BOUND_BOX = 0,		OB_BOUND_BOX = 0,
OB_BOUND_SPHERE = 1,		OB_BOUND_SPHERE = 1,
OB_BOUND_CYLINDER = 2,		OB_BOUND_CYLINDER = 2,
OB_BOUND_CONE = 3,		OB_BOUND_CONE = 3,
OB_BOUND_TRIANGLE_MESH = 4,		OB_BOUND_TRIANGLE_MESH = 4,
OB_BOUND_CONVEX_HULL = 5,		OB_BOUND_CONVEX_HULL = 5,
▲ Show 20 Lines • Show All 194 Lines • ▼ Show 20 Lines	typedef enum eObjectMode {
OB_MODE_OBJECT = 0,		OB_MODE_OBJECT = 0,
OB_MODE_EDIT = 1 << 0,		OB_MODE_EDIT = 1 << 0,
OB_MODE_SCULPT = 1 << 1,		OB_MODE_SCULPT = 1 << 1,
OB_MODE_VERTEX_PAINT = 1 << 2,		OB_MODE_VERTEX_PAINT = 1 << 2,
OB_MODE_WEIGHT_PAINT = 1 << 3,		OB_MODE_WEIGHT_PAINT = 1 << 3,
OB_MODE_TEXTURE_PAINT = 1 << 4,		OB_MODE_TEXTURE_PAINT = 1 << 4,
OB_MODE_PARTICLE_EDIT = 1 << 5,		OB_MODE_PARTICLE_EDIT = 1 << 5,
OB_MODE_POSE = 1 << 6,		OB_MODE_POSE = 1 << 6,
OB_MODE_GPENCIL = 1 << 7, /* NOTE: Just a dummy to make the UI nicer */		OB_MODE_GPENCIL_EDIT = 1 << 7,
		OB_MODE_GPENCIL_PAINT = 1 << 8,
		OB_MODE_GPENCIL_SCULPT = 1 << 9,
		OB_MODE_GPENCIL_WEIGHT = 1 << 10,
} eObjectMode;		} eObjectMode;

/* any mode where the brush system is used */		/* any mode where the brush system is used */
#define OB_MODE_ALL_PAINT (OB_MODE_SCULPT \| OB_MODE_VERTEX_PAINT \| OB_MODE_WEIGHT_PAINT \| OB_MODE_TEXTURE_PAINT)		#define OB_MODE_ALL_PAINT (OB_MODE_SCULPT \| OB_MODE_VERTEX_PAINT \| OB_MODE_WEIGHT_PAINT \| OB_MODE_TEXTURE_PAINT)

/* any mode that uses ob->sculpt */		/* any mode that uses ob->sculpt */
#define OB_MODE_ALL_SCULPT (OB_MODE_SCULPT \| OB_MODE_VERTEX_PAINT \| OB_MODE_WEIGHT_PAINT)		#define OB_MODE_ALL_SCULPT (OB_MODE_SCULPT \| OB_MODE_VERTEX_PAINT \| OB_MODE_WEIGHT_PAINT)

#define MAX_DUPLI_RECUR 8		#define MAX_DUPLI_RECUR 8

#ifdef __cplusplus		#ifdef __cplusplus
}		}
#endif		#endif

#endif		#endif