Page MenuHome
Differential D5357 Diff 20002 tests/python/bevel_operator.py

Changeset View

Standalone View

View Options

tests/python/bevel_operator.py

  • This file was added.
# ##### BEGIN GPL LICENSE BLOCK #####
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ##### END GPL LICENSE BLOCK #####
# To run all tests, use
# BLENDER_VERBOSE=1 blender path/to/bevel_regression.blend --python path/to/bevel_operator.py -- --run_all_tests
# To run one test, use
# BLENDER_VERBOSE=1 blender path/to/bevel_regression.blend --python path/to/bevel_operator.py -- --run_test <index>
# where <index> is the index of the test specified in the list tests.
import bpy
import os
import sys
sys.path.append(os.path.dirname(os.path.realpath(__file__)))
from modules.mesh_test import OperatorTest
brechtUnsubmitted
Done
Inline Actions

Doesn't from modules import mesh_test work, without any changes to sys.path?

That's what we use in cycles_render_tests.py.

brecht: Doesn't `from modules import mesh_test` work, without any changes to `sys.path`? That's what…
zazizizouAuthorUnsubmitted
Done
Inline Actions

It doesn't work. I get the error:

ImportError: cannot import name 'mesh_test' from 'modules' (unknown location)s

zazizizou: It doesn't work. I get the error: ImportError: cannot import name 'mesh_test' from 'modules'…
brechtUnsubmitted
Done
Inline Actions

I guess it's different when running from inside Blender. Still this code can be simplified:

import os
import sys

sys.path.append(os.path.dirname(os.path.realpath(__file__)))
from modules.mesh_test import OperatorTest
brecht: I guess it's different when running from inside Blender. Still this code can be simplified: ```…
brechtUnsubmitted
Done
Inline Actions

Why reload?

brecht: Why reload?
def main():
tests = [
# 0
['EDGE', {10}, 'Cube_test', 'Cube_result_1', 'bevel', {'offset': 0.2}],
['EDGE', {10, 7}, 'Cube_test', 'Cube_result_2', 'bevel', {'offset': 0.2, 'offset_type': 'WIDTH'}],
['EDGE', {8, 10, 7}, 'Cube_test', 'Cube_result_3', 'bevel', {'offset': 0.2, 'offset_type': 'DEPTH'}],
['EDGE', {10}, 'Cube_test', 'Cube_result_4', 'bevel', {'offset': 0.4, 'segments': 2}],
['EDGE', {10, 7}, 'Cube_test', 'Cube_result_5', 'bevel', {'offset': 0.4, 'segments': 3}],
brechtUnsubmitted
Done
Inline Actions

Style: space after comma, no space before ].

brecht: Style: space after comma, no space before `]`.
# 5
['EDGE', {8, 10, 7}, 'Cube_test', 'Cube_result_6', 'bevel', {'offset': 0.4, 'segments': 4}],
['EDGE', {0, 10, 4, 7}, 'Cube_test', 'Cube_result_7', 'bevel', {'offset': 0.4, 'segments': 5, 'profile': 0.2}],
['EDGE', {8, 10, 7}, 'Cube_test', 'Cube_result_8', 'bevel', {'offset': 0.4, 'segments': 5, 'profile': 0.25}],
['EDGE', {8, 10, 7}, 'Cube_test', 'Cube_result_9', 'bevel', {'offset': 0.4, 'segments': 6, 'profile': 0.9}],
['EDGE', {10, 7}, 'Cube_test', 'Cube_result_10', 'bevel', {'offset': 0.4, 'segments': 4, 'profile': 1.0}],
# 10
['EDGE', {8, 10, 7}, 'Cube_test', 'Cube_result_11', 'bevel', {'offset': 0.4, 'segments': 5, 'profile': 1.0}],
['EDGE', {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, 'Cube_test', 'Cube_result_12', 'bevel',
{'offset': 0.4, 'segments': 8}],
['EDGE', {5}, 'Pyr4_test', 'Pyr4_result_1', 'bevel', {'offset': 0.2}],
['EDGE', {2, 5}, 'Pyr4_test', 'Pyr4_result_2', 'bevel', {'offset': 0.2}],
['EDGE', {2, 3, 5}, 'Pyr4_test', 'Pyr4_result_3', 'bevel', {'offset': 0.2}],
# 15
['EDGE', {1, 2, 3, 5}, 'Pyr4_test', 'Pyr4_result_4', 'bevel', {'offset': 0.2}],
['EDGE', {1, 2, 3, 5}, 'Pyr4_test', 'Pyr4_result_5', 'bevel', {'offset': 0.2, 'segments': 3}],
['EDGE', {2, 3}, 'Pyr4_test', 'Pyr4_result_6', 'bevel', {'offset': 0.2, 'segments': 2}],
['EDGE', {1, 2, 3, 5}, 'Pyr4_test', 'Pyr4_result_7', 'bevel', {'offset': 0.2, 'segments': 4, 'profile': 0.15}],
['VERT', {1}, 'Pyr4_test', 'Pyr4_result_8', 'bevel', {'offset': 0.75, 'segments': 4, 'vertex_only': True}],
# 20
['VERT', {1}, 'Pyr4_test', 'Pyr4_result_9', 'bevel',
{'offset': 0.75, 'segments': 3, 'vertex_only': True, 'profile': 0.25}],
['EDGE', {2, 3}, 'Pyr6_test', 'Pyr6_result_1', 'bevel', {'offset': 0.2}],
['EDGE', {8, 2, 3}, 'Pyr6_test', 'Pyr6_result_2', 'bevel', {'offset': 0.2, 'segments': 2}],
['EDGE', {0, 2, 3, 4, 6, 7, 9, 10, 11}, 'Pyr6_test', 'Pyr6_result_3', 'bevel',
{'offset': 0.2, 'segments': 4, 'profile': 0.8}],
['EDGE', {8, 9, 3, 11}, 'Sept_test', 'Sept_result_1', 'bevel', {'offset': 0.1}],
# 25
['EDGE', {8, 9, 11}, 'Sept_test', 'Sept_result_2', 'bevel', {'offset': 0.1, 'offset_type': 'WIDTH'}],
['EDGE', {2, 8, 9, 12, 13, 14}, 'Saddle_test', 'Saddle_result_1', 'bevel', {'offset': 0.3, 'segments': 5}],
['VERT', {4}, 'Saddle_test', 'Saddle_result_2', 'bevel', {'offset': 0.6, 'segments': 6, 'vertex_only': True}],
['EDGE', {2, 5, 8, 11, 14, 18, 21, 24, 27, 30, 34, 37, 40, 43, 46, 50, 53, 56, 59, 62, 112, 113, 114, 115},
'Bent_test', 'Bent_result_1', 'bevel', {'offset': 0.2, 'segments': 3}],
['EDGE', {1, 8, 9, 10, 11}, 'Bentlines_test', 'Bentlines_result_1', 'bevel', {'offset': 0.2, 'segments': 3}],
# 30
['EDGE', {26, 12, 20}, 'Flaretop_test', 'Flaretop_result_1', 'bevel', {'offset': 0.4, 'segments': 2}],
['EDGE', {26, 12, 20}, 'Flaretop_test', 'Flaretop_result_2', 'bevel',
{'offset': 0.4, 'segments': 2, 'profile': 1.0}],
['FACE', {1, 6, 7, 8, 9, 10, 11, 12}, 'Flaretop_test', 'Flaretop_result_3', 'bevel',
{'offset': 0.4, 'segments': 4}],
['EDGE', {4, 8, 10, 18, 24}, 'BentL_test', 'BentL_result_1', 'bevel', {'offset': 0.2}],
['EDGE', {0, 1, 2, 10}, 'Wires_test', 'Wires_test_result_1', 'bevel', {'offset': 0.3}],
# 35
['VERT', {0, 1, 2, 3, 4, 5, 6, 7, 8, 9}, 'Wires_test', 'Wires_test_result_2', 'bevel',
{'offset': 0.3, 'vertex_only': True}],
['EDGE', {3, 4, 5}, 'tri', 'tri_result_1', 'bevel', {'offset': 0.2}],
['EDGE', {3, 4, 5}, 'tri', 'tri_result_2', 'bevel', {'offset': 0.2, 'segments': 2}],
['EDGE', {3, 4, 5}, 'tri', 'tri_result_3', 'bevel', {'offset': 0.2, 'segments': 3}],
['EDGE', {3, 4}, 'tri', 'tri_result_4', 'bevel', {'offset': 0.2}],
# 40
['EDGE', {3, 4}, 'tri', 'tri_result_5', 'bevel', {'offset': 0.2, 'segments': 2}],
['VERT', {3}, 'tri', 'tri_result_6', 'bevel', {'offset': 0.2, 'vertex_only': True}],
['VERT', {3}, 'tri', 'tri_result_7', 'bevel', {'offset': 0.2, 'segments': 2, 'vertex_only': True}],
['VERT', {3}, 'tri', 'tri_result_8', 'bevel', {'offset': 0.2, 'segments': 3, 'vertex_only': True}],
['VERT', {1}, 'tri', 'tri_result_9', 'bevel', {'offset': 0.2, 'vertex_only': True}],
# 45
['EDGE', {3, 4, 5}, 'tri1gap', 'tri1gap_result_1', 'bevel', {'offset': 0.2}],
['EDGE', {3, 4, 5}, 'tri1gap', 'tri1gap_result_2', 'bevel', {'offset': 0.2, 'segments': 2}],
['EDGE', {3, 4, 5}, 'tri1gap', 'tri1gap_result_3', 'bevel', {'offset': 0.2, 'segments': 3}],
['EDGE', {3, 4}, 'tri1gap', 'tri1gap_result_4', 'bevel', {'offset': 0.2}],
['EDGE', {3, 4}, 'tri1gap', 'tri1gap_result_5', 'bevel', {'offset': 0.2, 'segments': 2}],
# 50
['EDGE', {3, 4}, 'tri1gap', 'tri1gap_result_6', 'bevel', {'offset': 0.2, 'segments': 3}],
['EDGE', {3, 5}, 'tri1gap', 'tri1gap_result_7', 'bevel', {'offset': 0.2}],
['EDGE', {3, 5}, 'tri1gap', 'tri1gap_result_8', 'bevel', {'offset': 0.2, 'segments': 2}],
['EDGE', {3, 5}, 'tri1gap', 'tri1gap_result_9', 'bevel', {'offset': 0.2, 'segments': 3}],
['VERT', {3}, 'tri1gap', 'tri1gap_result_10', 'bevel', {'offset': 0.2, 'vertex_only': True}],
# 55
['EDGE', {3, 4, 5}, 'tri2gaps', 'tri2gaps_result_1', 'bevel', {'offset': 0.2}],
['EDGE', {3, 4, 5}, 'tri2gaps', 'tri2gaps_result_2', 'bevel', {'offset': 0.2, 'segments': 2}],
['EDGE', {3, 4, 5}, 'tri2gaps', 'tri2gaps_result_3', 'bevel', {'offset': 0.2, 'segments': 3}],
['EDGE', {3, 4}, 'tri2gaps', 'tri2gaps_result_4', 'bevel', {'offset': 0.2}],
['EDGE', {3, 4}, 'tri2gaps', 'tri2gaps_result_5', 'bevel', {'offset': 0.2, 'segments': 2}],
# 60
['EDGE', {3, 4}, 'tri2gaps', 'tri2gaps_result_6', 'bevel', {'offset': 0.2, 'segments': 3}],
['EDGE', {3, 4, 5}, 'tri3gaps', 'tri3gaps_result_1', 'bevel', {'offset': 0.2}],
['EDGE', {3, 4, 5}, 'tri3gaps', 'tri3gaps_result_2', 'bevel', {'offset': 0.2, 'segments': 2}],
['EDGE', {3, 4, 5}, 'tri3gaps', 'tri3gaps_result_3', 'bevel', {'offset': 0.2, 'segments': 3}],
['EDGE', {32, 33, 34, 35, 24, 25, 26, 27, 28, 29, 30, 31}, 'cube3', 'cube3_result_1', 'bevel', {'offset': 0.2}],
# 65
['EDGE', {32, 33, 34, 35, 24, 25, 26, 27, 28, 29, 30, 31}, 'cube3', 'cube3_result_2', 'bevel',
{'offset': 0.2, 'segments': 2}],
['EDGE', {32, 35}, 'cube3', 'cube3_result_3', 'bevel', {'offset': 0.2}],
['EDGE', {24, 35}, 'cube3', 'cube3_result_4', 'bevel', {'offset': 0.2}],
['EDGE', {24, 32, 35}, 'cube3', 'cube3_result_5', 'bevel', {'offset': 0.2, 'segments': 2}],
['EDGE', {24, 32, 35}, 'cube3', 'cube3_result_6', 'bevel', {'offset': 0.2, 'segments': 3}],
# 70
['EDGE', {0, 1, 6, 7, 12, 14, 16, 17}, 'Tray', 'Tray_result_1', 'bevel', {'offset': 0.01, 'segments': 2}],
['EDGE', {33, 4, 38, 8, 41, 10, 42, 12, 14, 17, 24, 31}, 'Bumptop', 'Bumptop_result_1', 'bevel',
{'offset': 0.1, 'segments': 4}],
['EDGE', {16, 14, 15}, 'Multisegment_test', 'Multisegment_result_1', 'bevel', {'offset': 0.2}],
['EDGE', {16, 14, 15}, 'Multisegment_test', 'Multisegment_result_1', 'bevel', {'offset': 0.2}],
['EDGE', {19, 20, 23, 15}, 'Window_test', 'Window_result_1', 'bevel', {'offset': 0.05, 'segments': 2}],
# 75
['EDGE', {8}, 'Cube_hn_test', 'Cube_hn_result_1', 'bevel', {'offset': 0.2, 'harden_normals': True}],
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_1', 'bevel',
{'offset': 0.2, 'miter_outer': 'PATCH'}],
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_2', 'bevel',
{'offset': 0.2, 'segments': 2, 'miter_outer': 'PATCH'}],
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_3', 'bevel',
{'offset': 0.2, 'segments': 3, 'miter_outer': 'PATCH'}],
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_4', 'bevel',
{'offset': 0.2, 'miter_outer': 'ARC'}],
# 80
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_5', 'bevel',
{'offset': 0.2, 'segments': 2, 'miter_outer': 'ARC'}],
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_6', 'bevel',
{'offset': 0.2, 'segments': 3, 'miter_outer': 'ARC'}],
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_7', 'bevel',
{'offset': 0.2, 'miter_outer': 'PATCH', 'miter_inner': 'ARC'}],
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_8', 'bevel',
{'offset': 0.2, 'segments': 2, 'miter_outer': 'PATCH', 'miter_inner': 'ARC'}],
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps2_test', 'Blocksteps2_result_9', 'bevel',
{'offset': 0.2, 'segments': 2, 'miter_outer': 'ARC'}],
# 85
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps3_test', 'Blocksteps3_result_10', 'bevel',
{'offset': 0.2, 'segments': 2, 'miter_outer': 'ARC'}],
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps4_test', 'Blocksteps4_result_11', 'bevel',
{'offset': 0.2, 'segments': 2, 'miter_outer': 'ARC'}],
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps4_test', 'Blocksteps4_result_12', 'bevel',
{'offset': 0.2, 'segments': 3, 'miter_outer': 'ARC'}],
['EDGE', {1, 7}, 'Spike_test', 'Spike_result_1', 'bevel', {'offset': 0.2, 'segments': 3}]
]
operator_test = OperatorTest(tests)
command = list(sys.argv)
brechtUnsubmitted
Done
Inline Actions

It should run all the tests, not stop on the first failure. Otherwise you don't know what you're updating. Seeing all tests that failed also helps to see patterns to find the cause.

brecht: It should run all the tests, not stop on the first failure. Otherwise you don't know what…
for i, cmd in enumerate(command):
if cmd == "--run-all-tests":
operator_test.run_all_tests()
brechtUnsubmitted
Done
Inline Actions

Name these --run-all-tests and --run-test. Using underscores here is non-standard.

brecht: Name these `--run-all-tests` and `--run-test`. Using underscores here is non-standard.
break
elif cmd == "--run-test":
index = int(command[i + 1])
operator_test.run_test(index)
break
brechtUnsubmitted
Done
Inline Actions

Perhaps the logic in this file could be deduplicated, by having something like this:

if __name__ == "__main__":
    ... construct list of MeshTest ...
    mesh_test.run_tests(test_list)

Where mesh_test.run_tests handles the traceback, check for updates, etc.

brecht: Perhaps the logic in this file could be deduplicated, by having something like this: ``` if…
if __name__ == "__main__":
try:
main()
except:
import traceback
traceback.print_exc()
sys.exit(1)