Page MenuHome
Differential D6807 Diff 21646 extern/opennurbs/opennurbs_qsort_template.h

Changeset View

Standalone View

View Options

extern/opennurbs/opennurbs_qsort_template.h

  • This file was added.
// NOTE: 14 April 2011 Dale Lear:
// Replace this code with Mikko's "quacksort", once "quacksort" is fully debugged
// This code is based ont the VC 2010 crt qsort.c file and must not be released
// with public opennurbs.
#if !defined(ON_COMPILING_OPENNURBS_QSORT_FUNCTIONS)
/*
See opennurbs_sort.cpp for examples of using openurbs_qsort_template.c
to define type specific quick sort functions.
*/
#error Do not compile openurbs_qsort_template.c directly.
#endif
#define ON_QSORT_CUTOFF 8 /* testing shows that this is good value */
/* Note: the theoretical number of stack entries required is
no more than 1 + log2(num). But we switch to insertion
sort for CUTOFF elements or less, so we really only need
1 + log2(num) - log2(CUTOFF) stack entries. For a CUTOFF
of 8, that means we need no more than 30 stack entries for
32 bit platforms, and 62 for 64-bit platforms. */
#define ON_QSORT_STKSIZ (8*sizeof(void*) - 2)
// ON_SORT_TEMPLATE_TYPE -> double, int, ....
#if !defined(ON_SORT_TEMPLATE_TYPE)
#error Define ON_SORT_TEMPLATE_TYPE macro before including opennurbs_qsort_template.c
#endif
#if !defined(ON_QSORT_FNAME)
#error Define ON_QSORT_FNAME macro before including opennurbs_qsort_template.c
#endif
#if !defined(ON_QSORT_GT) && !defined(ON_QSORT_LE) && !defined(ON_QSORT_EQ)
#if defined(ON_SORT_TEMPLATE_COMPARE)
// use a compare function like strcmp for char* strings
#define ON_QSORT_GT(A,B) ON_SORT_TEMPLATE_COMPARE(A,B) > 0
#define ON_QSORT_LE(A,B) ON_SORT_TEMPLATE_COMPARE(A,B) <= 0
#define ON_QSORT_EQ(A,B) ON_SORT_TEMPLATE_COMPARE(A,B) == 0
#else
// use type compares
#define ON_QSORT_GT(A,B) *A > *B
#define ON_QSORT_LE(A,B) *A <= *B
#define ON_QSORT_EQ(A,B) *A == *B
#endif
#endif
#if defined(ON_SORT_TEMPLATE_SWAP)
#define ON_QSORT_SWAP ON_SORT_TEMPLATE_SWAP
#elif defined(ON_SORT_TEMPLATE_USE_MEMCPY)
#define ON_QSORT_SWAP(A,B) memcpy(&tmp,A,sizeof(tmp));memcpy(A,B,sizeof(tmp));memcpy(B,&tmp,sizeof(tmp))
#else
#define ON_QSORT_SWAP(A,B) tmp = *A; *A = *B; *B = tmp
#endif
// When opennurbs_qsort_template.h is included more than once
// in the same file for sorting the same type with different
// compare functions, then either
// 1) After the first include, define ON_SORT_TEMPLATE_HAVE_SHORT_SORT
// to prevent generation of an identical short-sort function
// or
// 2) Define different values of ON_QSORT_SHORT_SORT_FNAME to generate
// different short-sort helper functions.
#if !defined(ON_SORT_TEMPLATE_HAVE_SHORT_SORT)
#if !defined(ON_QSORT_SHORT_SORT_FNAME)
// The default name for the short sort helper function is ON__shortsort
#define ON_QSORT_SHORT_SORT_FNAME ON__shortsort
#endif
static void ON_QSORT_SHORT_SORT_FNAME(ON_SORT_TEMPLATE_TYPE *, ON_SORT_TEMPLATE_TYPE *);
static void ON_QSORT_SHORT_SORT_FNAME(ON_SORT_TEMPLATE_TYPE *lo, ON_SORT_TEMPLATE_TYPE *hi)
{
ON_SORT_TEMPLATE_TYPE *p;
ON_SORT_TEMPLATE_TYPE *max;
ON_SORT_TEMPLATE_TYPE tmp;
/* Note: in assertions below, i and j are alway inside original bound of
array to sort. */
while (hi > lo)
{
/* A[i] <= A[j] for i <= j, j > hi */
max = lo;
for (p = lo+1; p <= hi; p++)
{
/* A[i] <= A[max] for lo <= i < p */
if ( ON_QSORT_GT(p,max) )
{
max = p;
}
/* A[i] <= A[max] for lo <= i <= p */
}
/* A[i] <= A[max] for lo <= i <= hi */
ON_QSORT_SWAP(max,hi);
/* A[i] <= A[hi] for i <= hi, so A[i] <= A[j] for i <= j, j >= hi */
hi--;
/* A[i] <= A[j] for i <= j, j > hi, loop top condition established */
}
/* A[i] <= A[j] for i <= j, j > lo, which implies A[i] <= A[j] for i < j,
so array is sorted */
}
#endif
/* this parameter defines the cutoff between using quick sort and
insertion sort for arrays; arrays with lengths shorter or equal to the
below value use insertion sort */
#if defined(ON_SORT_TEMPLATE_STATIC_FUNCTION)
static
#endif
void
ON_QSORT_FNAME (
ON_SORT_TEMPLATE_TYPE *base,
size_t num
)
{
ON_SORT_TEMPLATE_TYPE *lo; /* start of sub-array currently sorting */
ON_SORT_TEMPLATE_TYPE *hi; /* end of sub-array currently sorting */
ON_SORT_TEMPLATE_TYPE *mid; /* points to middle of subarray */
ON_SORT_TEMPLATE_TYPE *loguy; /* traveling pointers for partition step */
ON_SORT_TEMPLATE_TYPE *higuy; /* traveling pointers for partition step */
ON_SORT_TEMPLATE_TYPE *lostk[ON_QSORT_STKSIZ];
ON_SORT_TEMPLATE_TYPE *histk[ON_QSORT_STKSIZ];
size_t size; /* size of the sub-array */
int stkptr; /* stack for saving sub-array to be processed */
ON_SORT_TEMPLATE_TYPE tmp;
if ( 0 == base || num < 2 )
return;
stkptr = 0; /* initialize stack */
lo = base;
hi = base + (num-1); /* initialize limits */
/* this entry point is for pseudo-recursion calling: setting
lo and hi and jumping to here is like recursion, but stkptr is
preserved, locals aren't, so we preserve stuff on the stack */
recurse:
size = (hi - lo) + 1; /* number of el's to sort */
/* below a certain size, it is faster to use a O(n^2) sorting method */
if (size <= ON_QSORT_CUTOFF)
{
ON_QSORT_SHORT_SORT_FNAME(lo, hi);
}
else {
/* First we pick a partitioning element. The efficiency of the
algorithm demands that we find one that is approximately the median
of the values, but also that we select one fast. We choose the
median of the first, middle, and last elements, to avoid bad
performance in the face of already sorted data, or data that is made
up of multiple sorted runs appended together. Testing shows that a
median-of-three algorithm provides better performance than simply
picking the middle element for the latter case. */
mid = lo + (size / 2); /* find middle element */
/* Sort the first, middle, last elements into order */
if ( ON_QSORT_GT(lo,mid) ) {ON_QSORT_SWAP(lo,mid);}
if ( ON_QSORT_GT(lo,hi) ) {ON_QSORT_SWAP(lo,hi);}
if ( ON_QSORT_GT(mid,hi) ) {ON_QSORT_SWAP(mid,hi);}
/* We now wish to partition the array into three pieces, one consisting
of elements <= partition element, one of elements equal to the
partition element, and one of elements > than it. This is done
below; comments indicate conditions established at every step. */
loguy = lo;
higuy = hi;
/* Note that higuy decreases and loguy increases on every iteration,
so loop must terminate. */
for (;;)
{
/* lo <= loguy < hi, lo < higuy <= hi,
A[i] <= A[mid] for lo <= i <= loguy,
A[i] > A[mid] for higuy <= i < hi,
A[hi] >= A[mid] */
/* The doubled loop is to avoid calling comp(mid,mid), since some
existing comparison funcs don't work when passed the same
value for both pointers. */
if (mid > loguy)
{
do {
loguy++;
} while (loguy < mid && ON_QSORT_LE(loguy,mid));
}
if (mid <= loguy)
{
do {
loguy++;
} while (loguy <= hi && ON_QSORT_LE(loguy,mid));
}
/* lo < loguy <= hi+1, A[i] <= A[mid] for lo <= i < loguy,
either loguy > hi or A[loguy] > A[mid] */
do {
higuy--;
} while (higuy > mid && ON_QSORT_GT(higuy,mid));
/* lo <= higuy < hi, A[i] > A[mid] for higuy < i < hi,
either higuy == lo or A[higuy] <= A[mid] */
if (higuy < loguy)
break;
/* if loguy > hi or higuy == lo, then we would have exited, so
A[loguy] > A[mid], A[higuy] <= A[mid],
loguy <= hi, higuy > lo */
ON_QSORT_SWAP(loguy,higuy);
/* If the partition element was moved, follow it. Only need
to check for mid == higuy, since before the swap,
A[loguy] > A[mid] implies loguy != mid. */
if (mid == higuy)
mid = loguy;
/* A[loguy] <= A[mid], A[higuy] > A[mid]; so condition at top
of loop is re-established */
}
/* A[i] <= A[mid] for lo <= i < loguy,
A[i] > A[mid] for higuy < i < hi,
A[hi] >= A[mid]
higuy < loguy
implying:
higuy == loguy-1
or higuy == hi - 1, loguy == hi + 1, A[hi] == A[mid] */
/* Find adjacent elements equal to the partition element. The
doubled loop is to avoid calling comp(mid,mid), since some
existing comparison funcs don't work when passed the same value
for both pointers. */
higuy++;
if (mid < higuy) {
do {
higuy--;
} while (higuy > mid && ON_QSORT_EQ(higuy,mid));
}
if (mid >= higuy) {
do {
higuy--;
} while (higuy > lo && ON_QSORT_EQ(higuy,mid));
}
/* OK, now we have the following:
higuy < loguy
lo <= higuy <= hi
A[i] <= A[mid] for lo <= i <= higuy
A[i] == A[mid] for higuy < i < loguy
A[i] > A[mid] for loguy <= i < hi
A[hi] >= A[mid] */
/* We've finished the partition, now we want to sort the subarrays
[lo, higuy] and [loguy, hi].
We do the smaller one first to minimize stack usage.
We only sort arrays of length 2 or more.*/
if ( higuy - lo >= hi - loguy ) {
if (lo < higuy) {
lostk[stkptr] = lo;
histk[stkptr] = higuy;
++stkptr;
} /* save big recursion for later */
if (loguy < hi) {
lo = loguy;
goto recurse; /* do small recursion */
}
}
else {
if (loguy < hi) {
lostk[stkptr] = loguy;
histk[stkptr] = hi;
++stkptr; /* save big recursion for later */
}
if (lo < higuy) {
hi = higuy;
goto recurse; /* do small recursion */
}
}
}
/* We have sorted the array, except for any pending sorts on the stack.
Check if there are any, and do them. */
--stkptr;
if (stkptr >= 0) {
lo = lostk[stkptr];
hi = histk[stkptr];
goto recurse; /* pop subarray from stack */
}
else
return; /* all subarrays done */
}
#undef ON_QSORT_GT
#undef ON_QSORT_LE
#undef ON_QSORT_EQ
#undef ON_QSORT_SWAP
#undef ON_QSORT_CUTOFF
#undef ON_QSORT_STKSIZ