Differential D1667 Diff 5565 manual/painting/sculpting/introduction.rst

Changeset View

Standalone View

manual/painting/sculpting/introduction.rst

Context not available.
	control the amount of pinching at the edge of the sphere.	control the amount of pinching at the edge of the sphere.
	Clay (:kbd:`C`)	Clay (:kbd:`C`)
	Similar to the Draw brush, but includes settings to adjust the plane on which the brush acts.	Similar to the Draw brush, but includes settings to adjust the plane on which the brush acts.
	Clay Strips	Clay Strips (:kbd:`C`)
	Similar to the Clay brush, but it uses a cube test to define the brush area of influence rather than a sphere.	Similar to the Clay brush, but it uses a cube test to define the brush area of influence rather than a sphere.
	Crease	Crease (:kbd:`Shift-C`)
	Creates sharp indents or ridges by pushing or pulling the mesh, while pinching the vertices together.	Creates sharp indents or ridges by pushing or pulling the mesh, while pinching the vertices together.
	Draw (:kbd:`D`)	Draw (:kbd:`X`)
	Moves vertices inward or outward,	Moves vertices inward or outward,
	based the average normal of the vertices contained within the drawn brush stroke.	based the average normal of the vertices contained within the drawn brush stroke.
	Fill	Fill
	The Fill brush works like the Flatten brush, but only brings vertices below the brush plane upwards.	The Fill brush works like the Flatten brush, but only brings vertices below the brush plane upwards.
	The inverse of the Scrape brush is to Deepen by pushing vertices above the plane downward.	The inverse of the Scrape brush is to Deepen by pushing vertices above the plane downward.
	Flatten (:kbd:`T`)	Flatten (:kbd:`Shift-T`)
	The Flatten brush finds an 'area plane'	The Flatten brush finds an 'area plane'
	located by default at the average height above/below the vertices within the brush area.	located by default at the average height above/below the vertices within the brush area.
	The vertices are then pulled towards this plane.	The vertices are then pulled towards this plane.
Context not available.
	As the name suggests,	As the name suggests,
	eliminates irregularities in the area of the mesh within the brush's	eliminates irregularities in the area of the mesh within the brush's
	influence by smoothing the positions of the vertices.	influence by smoothing the positions of the vertices.
	Snake Hook	Snake Hook (:kbd:`K`)
	Pulls vertices along with the movement of the brush to create long, snake-like forms.	Pulls vertices along with the movement of the brush to create long, snake-like forms.
	Thumb	Thumb
	Similar to the Nudge brush, this one flattens the mesh in the brush area,	Similar to the Nudge brush, this one flattens the mesh in the brush area,
Context not available.
	The following parameters are available for the Dots, Space,	The following parameters are available for the Dots, Space,
	and Airbrush strokes:	and Airbrush strokes:

		Jitter
		Jitters the position of the brush while painting.
	Smooth stroke	Smooth stroke
	Brush lags behind mouse and follows a smoother path. When enabled, the following become active:	Brush lags behind mouse and follows a smoother path. When enabled, the following become active:

Context not available.
	Sets the minimum distance from the last point before stroke continues.	Sets the minimum distance from the last point before stroke continues.
	Factor	Factor
	Sets the amount of smoothing	Sets the amount of smoothing
	Jitter
	Jitters the position of the brush while painting.


	Curve Menu	Curve Menu
Context not available.
	This setting allows you to modify the scaling factor of the texture. Not available for Drag textures.	This setting allows you to modify the scaling factor of the texture. Not available for Drag textures.
	Sample Bias	Sample Bias
	Value added to texture samples.	Value added to texture samples.
	Overlay
	When enabled, the texture is shown in the viewport, as determined by the; Alpha value.

		Dyntopo Menu
		------------

		Detail Type
		Dynotopo uses three different detail methods to create dynamic detail to an object. The
		methods avaiable are Relative Detail (Default), Constant Detail, and Brush Detail.

		Relative Detail
		This method is uses a detail size based on the number of pixels, and in turn
		will create topology in that size.

		Constant Detail
		To keep detail uniform across the entire object, Constant Detail can be used.
		The Detail is based on the percentage of a single BU (Blender Unit).

		Brush Detail
		Giving more control over the topology, with this method you can create topology
		based on the brush size. You can increase and lower topology by simply resizing
		the brush itself. The detail size is based the size of the brush itself, where
		100% will create topology the size of the brush ring itself.

		Detail Size
		Each Deatil Type's detail is set here. Depending on the Detail Type being used
		this property will rather show as a pixel count (px), or percentage.

		Detail Refine Method
		When using Dynamic Topology, a certain method will be used to tell how topology
		is handled. Setting the option will determine which of the methods will be used when
		altering the topology.

		Subdivide
		Just like the subdivide command, this method will only subdivide topology
		to match the detail given.

		Collapse
		When topology is too dense, and is smaller than the detail given, edges will
		be collapse to fit the detail size appropriately.

		Subdivde Collapse
		This method combines the two methods, subdividing edges smaller than the
		detail size, and collapsing topology.

		Detail Flood Fill
		When using Constant Detail mode, this option is made available, allowing
		you to fill the entire object with a uniform detail, based on the detail size.

	Symmetry Menu	Symmetry Menu
	-------------	-------------

	Mirror the brush strokes across the selected local axes.	Mirror
	Note that if you want to alter the directions the axes point in,	Mirror the brush strokes across the selected local axes.
	you must rotate the model in Edit Mode, not Object Mode.	Note that if you want to alter the directions the axes point in,
		you must rotate the model in Edit Mode, not Object Mode
	Feather
	Reduces the strength of the stroke where it overlaps the planes of symmetry.
	Radial	Radial
	These settings allow for radial symmetry in the desired axes.	These settings allow for radial symmetry in the desired axes.
	The number determines how many times the stroke will be repeated within 360 degrees around the central axes.	The number determines how many times the stroke will be repeated within 360 degrees around the central axes.
		Feather
		Reduces the strength of the stroke where it overlaps the planes of symmetry.
		Lock
		These three buttons allow you to block any modification/deformation
		of your model along selected local axes, while you are sculpting it.
		Tiling
		Using this option allows you to seamlessly tile your strokes along the given
		axes.
		Tile Offset
		The default tile size is set to one BU (Blender Unit). The offset allows the
		option to alter the tile size along all three axes.

		Overlay Menu
		-------------

		Overlay
		When enabled, the brush texture is shown in the viewport

		View
		The eye icon is used as a toggle to show or hide the given brush texture
		Alpha
		You can change the amount of transparency used when showing the texture using
		the Alpha slider
		Stroke Overlay
		The brush icon allows you to turn off the viewport overlay during strokes


	Options Menu	Options Menu
	------------	-------------

		Gravity
		Factor
		Setting the factor allows you to add gravity to your brush strokes, giving
		it a draping effect.
		Orientation
		Using another object, the gravity can be oriented to the set object's local
		Z axis, changing the direction of the gravity.
	Threaded Sculpt	Threaded Sculpt
	Takes advantage of multiple CPU processors to improve sculpting performance.	Takes advantage of multiple CPU processors to improve sculpting performance.
	Fast Navigation	Fast Navigation
	For Multires models, show low resolution while navigation the viewport.	For Multires models, show low resolution while navigation the viewport.
	Show Brush	Use Deform Only
	Shows the brush shape in the viewport.	Limits active modifiers on the active object to Deform modifiers, and Multiresolution
		Show Diffuse Color
		Allows the active object to show it's diffuse color when sculpting
	Unified Settings:	Unified Settings:
	Size	Size
	Forces the brush size to be shared across brushes.	Forces the brush size to be shared across brushes.
	Strength	Strength
	Forces the brush strength to be shared across brushes.	Forces the brush strength to be shared across brushes.
	Lock	Color
	These three buttons allow you to block any modification/deformation	Not Used in Sculpt Mode
	of your model along selected local axes, while you are sculpting it.	Show Brush
		Shows the brush shape in the viewport.
		Color (Add/Subtract)
		Set the color of the brush ring when its particular effect is active


	Appearance Menu	Appearance Menu
	---------------	----------------

	You can set the color of the brush depending on if it is in additive or subtractive mode.	Show Brush
		Shows the brush shape in the viewport.
		Color (Add/Subtract)
		Set the color of the brush ring when its particular effect is active
		Custom Icon
		Append an image file to the active brush as an icon.

	You can also set the brush icon from an image file.


	Tool Menu	Tool Menu
	---------	---------

Context not available.
	* - Brush direction toggle (Add / Sub)	* - Brush direction toggle (Add / Sub)
	- :kbd:`Ctrl` pressed while sculpting	- :kbd:`Ctrl` pressed while sculpting
	* - Set stroke method (airbrush, anchored, ..)	* - Set stroke method (airbrush, anchored, ..)
	- :kbd:`A`	- :kbd:`E`
		* - Toggle Smooth Stroke
		- :kbd:`Shift-S`
	* - Smooth stroke toggle	* - Smooth stroke toggle
	- :kbd:`Shift-S`	- :kbd:`Shift`
	* - Draw brush	* - Draw brush
	- :kbd:`D`	- :kbd:`X`
	* - Smooth brush	* - Smooth brush
	- :kbd:`S`	- :kbd:`S`
	* - Pinch/Magnify brush	* - Pinch/Magnify brush
Context not available.
	- :kbd:`PageDown`	- :kbd:`PageDown`
	* - Set multires level	* - Set multires level
	- :kbd:`Ctrl-0` to :kbd:`Ctrl-5`	- :kbd:`Ctrl-0` to :kbd:`Ctrl-5`
	* - Dynamic topology toggle	* - Dynamic Topology toggle
	- :kbd:`Ctrl-D`	- :kbd:`Ctrl-D`
		* - Dynamic Topology detail
		- :kbd:`Shift-D`
	* - Set texture angle type	* - Set texture angle type
	- :kbd:`R`	- :kbd:`R`
	* - Translate/scale/rotate stencil texture	* - Translate/scale/rotate stencil texture
Context not available.
	- :kbd:`RMB`, :kbd:`Shift-RMB`, :kbd:`Ctrl-RMB`	- :kbd:`RMB`, :kbd:`Shift-RMB`, :kbd:`Ctrl-RMB`
	* - Translate/scale/rotate stencil mask	* - Translate/scale/rotate stencil mask
	- :kbd:`Alt-RMB`, :kbd:`Alt-Shift-RMB`, :kbd:`Alt-Ctrl-RMB`	- :kbd:`Alt-RMB`, :kbd:`Alt-Shift-RMB`, :kbd:`Alt-Ctrl-RMB`

Context not available.