Page MenuHome
Differential D16893 Diff 58979 source/blender/nodes/geometry/nodes/node_geo_mesh_primitive_cone.cc

Changeset View

Standalone View

View Options

source/blender/nodes/geometry/nodes/node_geo_mesh_primitive_cone.cc

Show First 20 Lines • Show All 92 Lines • ▼ Show 20 Lines
edge.v1 = config.last_ring_verts_start + i; edge.v1 = config.last_ring_verts_start + i;
edge.v2 = config.last_vert; edge.v2 = config.last_vert;
edge.flag = ME_EDGEDRAW; edge.flag = ME_EDGEDRAW;
} }
} }
} }
static void calculate_cone_faces(const ConeConfig &config, static void calculate_cone_faces(const ConeConfig &config,
MutableSpan<MLoop> loops, MutableSpan<int> corner_verts,
MutableSpan<int> corner_edges,
MutableSpan<MPoly> polys) MutableSpan<MPoly> polys)
{ {
int rings_poly_start = 0; int rings_poly_start = 0;
int rings_loop_start = 0; int rings_loop_start = 0;
if (config.top_has_center_vert) { if (config.top_has_center_vert) {
rings_poly_start = config.circle_segments; rings_poly_start = config.circle_segments;
rings_loop_start = config.circle_segments * 3; rings_loop_start = config.circle_segments * 3;
/* Top cone tip or center triangle fan in the fill. */ /* Top cone tip or center triangle fan in the fill. */
const int top_center_vert = 0; const int top_center_vert = 0;
const int top_fan_edges_start = 0; const int top_fan_edges_start = 0;
for (const int i : IndexRange(config.circle_segments)) { for (const int i : IndexRange(config.circle_segments)) {
const int loop_start = i * 3; const int loop_start = i * 3;
MPoly &poly = polys[i]; MPoly &poly = polys[i];
poly.loopstart = loop_start; poly.loopstart = loop_start;
poly.totloop = 3; poly.totloop = 3;
loops[loop_start + 0].v = config.first_ring_verts_start + i; corner_verts[loop_start + 0] = config.first_ring_verts_start + i;
loops[loop_start + 0].e = config.first_ring_edges_start + i; corner_edges[loop_start + 0] = config.first_ring_edges_start + i;
loops[loop_start + 1].v = config.first_ring_verts_start + ((i + 1) % config.circle_segments); corner_verts[loop_start + 1] = config.first_ring_verts_start +
loops[loop_start + 1].e = top_fan_edges_start + ((i + 1) % config.circle_segments); ((i + 1) % config.circle_segments);
corner_edges[loop_start + 1] = top_fan_edges_start + ((i + 1) % config.circle_segments);
loops[loop_start + 2].v = top_center_vert; corner_verts[loop_start + 2] = top_center_vert;
loops[loop_start + 2].e = top_fan_edges_start + i; corner_edges[loop_start + 2] = top_fan_edges_start + i;
} }
} }
else if (config.fill_type == GEO_NODE_MESH_CIRCLE_FILL_NGON) { else if (config.fill_type == GEO_NODE_MESH_CIRCLE_FILL_NGON) {
rings_poly_start = 1; rings_poly_start = 1;
rings_loop_start = config.circle_segments; rings_loop_start = config.circle_segments;
/* Center n-gon in the fill. */ /* Center n-gon in the fill. */
MPoly &poly = polys[0]; MPoly &poly = polys[0];
poly.loopstart = 0; poly.loopstart = 0;
poly.totloop = config.circle_segments; poly.totloop = config.circle_segments;
for (const int i : IndexRange(config.circle_segments)) { for (const int i : IndexRange(config.circle_segments)) {
loops[i].v = i; corner_verts[i] = i;
loops[i].e = i; corner_edges[i] = i;
} }
} }
/* Quads connect one edge ring to the next one. */ /* Quads connect one edge ring to the next one. */
for (const int i : IndexRange(config.tot_quad_rings)) { for (const int i : IndexRange(config.tot_quad_rings)) {
const int this_ring_poly_start = rings_poly_start + i * config.circle_segments; const int this_ring_poly_start = rings_poly_start + i * config.circle_segments;
const int this_ring_loop_start = rings_loop_start + i * config.circle_segments * 4; const int this_ring_loop_start = rings_loop_start + i * config.circle_segments * 4;
const int this_ring_vert_start = config.first_ring_verts_start + (i * config.circle_segments); const int this_ring_vert_start = config.first_ring_verts_start + (i * config.circle_segments);
const int next_ring_vert_start = this_ring_vert_start + config.circle_segments; const int next_ring_vert_start = this_ring_vert_start + config.circle_segments;
const int this_ring_edges_start = config.first_ring_edges_start + const int this_ring_edges_start = config.first_ring_edges_start +
(i * 2 * config.circle_segments); (i * 2 * config.circle_segments);
const int next_ring_edges_start = this_ring_edges_start + (2 * config.circle_segments); const int next_ring_edges_start = this_ring_edges_start + (2 * config.circle_segments);
const int ring_connections_start = this_ring_edges_start + config.circle_segments; const int ring_connections_start = this_ring_edges_start + config.circle_segments;
for (const int j : IndexRange(config.circle_segments)) { for (const int j : IndexRange(config.circle_segments)) {
const int loop_start = this_ring_loop_start + j * 4; const int loop_start = this_ring_loop_start + j * 4;
MPoly &poly = polys[this_ring_poly_start + j]; MPoly &poly = polys[this_ring_poly_start + j];
poly.loopstart = loop_start; poly.loopstart = loop_start;
poly.totloop = 4; poly.totloop = 4;
loops[loop_start + 0].v = this_ring_vert_start + j; corner_verts[loop_start + 0] = this_ring_vert_start + j;
loops[loop_start + 0].e = ring_connections_start + j; corner_edges[loop_start + 0] = ring_connections_start + j;
loops[loop_start + 1].v = next_ring_vert_start + j; corner_verts[loop_start + 1] = next_ring_vert_start + j;
loops[loop_start + 1].e = next_ring_edges_start + j; corner_edges[loop_start + 1] = next_ring_edges_start + j;
loops[loop_start + 2].v = next_ring_vert_start + ((j + 1) % config.circle_segments); corner_verts[loop_start + 2] = next_ring_vert_start + ((j + 1) % config.circle_segments);
loops[loop_start + 2].e = ring_connections_start + ((j + 1) % config.circle_segments); corner_edges[loop_start + 2] = ring_connections_start + ((j + 1) % config.circle_segments);
loops[loop_start + 3].v = this_ring_vert_start + ((j + 1) % config.circle_segments); corner_verts[loop_start + 3] = this_ring_vert_start + ((j + 1) % config.circle_segments);
loops[loop_start + 3].e = this_ring_edges_start + j; corner_edges[loop_start + 3] = this_ring_edges_start + j;
} }
} }
const int bottom_poly_start = rings_poly_start + config.tot_quad_rings * config.circle_segments; const int bottom_poly_start = rings_poly_start + config.tot_quad_rings * config.circle_segments;
const int bottom_loop_start = rings_loop_start + const int bottom_loop_start = rings_loop_start +
config.tot_quad_rings * config.circle_segments * 4; config.tot_quad_rings * config.circle_segments * 4;
if (config.bottom_has_center_vert) { if (config.bottom_has_center_vert) {
/* Bottom cone tip or center triangle fan in the fill. */ /* Bottom cone tip or center triangle fan in the fill. */
for (const int i : IndexRange(config.circle_segments)) { for (const int i : IndexRange(config.circle_segments)) {
const int loop_start = bottom_loop_start + i * 3; const int loop_start = bottom_loop_start + i * 3;
MPoly &poly = polys[bottom_poly_start + i]; MPoly &poly = polys[bottom_poly_start + i];
poly.loopstart = loop_start; poly.loopstart = loop_start;
poly.totloop = 3; poly.totloop = 3;
loops[loop_start + 0].v = config.last_ring_verts_start + i; corner_verts[loop_start + 0] = config.last_ring_verts_start + i;
loops[loop_start + 0].e = config.last_fan_edges_start + i; corner_edges[loop_start + 0] = config.last_fan_edges_start + i;
loops[loop_start + 1].v = config.last_vert; corner_verts[loop_start + 1] = config.last_vert;
loops[loop_start + 1].e = config.last_fan_edges_start + (i + 1) % config.circle_segments; corner_edges[loop_start + 1] = config.last_fan_edges_start +
(i + 1) % config.circle_segments;
loops[loop_start + 2].v = config.last_ring_verts_start + (i + 1) % config.circle_segments; corner_verts[loop_start + 2] = config.last_ring_verts_start +
loops[loop_start + 2].e = config.last_ring_edges_start + i; (i + 1) % config.circle_segments;
corner_edges[loop_start + 2] = config.last_ring_edges_start + i;
} }
} }
else if (config.fill_type == GEO_NODE_MESH_CIRCLE_FILL_NGON) { else if (config.fill_type == GEO_NODE_MESH_CIRCLE_FILL_NGON) {
/* Center n-gon in the fill. */ /* Center n-gon in the fill. */
MPoly &poly = polys[bottom_poly_start]; MPoly &poly = polys[bottom_poly_start];
poly.loopstart = bottom_loop_start; poly.loopstart = bottom_loop_start;
poly.totloop = config.circle_segments; poly.totloop = config.circle_segments;
for (const int i : IndexRange(config.circle_segments)) { for (const int i : IndexRange(config.circle_segments)) {
/* Go backwards to reverse surface normal. */ /* Go backwards to reverse surface normal. */
loops[bottom_loop_start + i].v = config.last_vert - i; corner_verts[bottom_loop_start + i] = config.last_vert - i;
loops[bottom_loop_start + i].e = config.last_edge - ((i + 1) % config.circle_segments); corner_edges[bottom_loop_start + i] = config.last_edge - ((i + 1) % config.circle_segments);
} }
} }
} }
static void calculate_selection_outputs(const ConeConfig &config, static void calculate_selection_outputs(const ConeConfig &config,
const ConeAttributeOutputs &attribute_outputs, const ConeAttributeOutputs &attribute_outputs,
MutableAttributeAccessor attributes) MutableAttributeAccessor attributes)
{ {
▲ Show 20 Lines • Show All 184 Lines • ▼ Show 20 Lines
Mesh *mesh = BKE_mesh_new_nomain( Mesh *mesh = BKE_mesh_new_nomain(
config.tot_verts, config.tot_edges, 0, config.tot_corners, config.tot_faces); config.tot_verts, config.tot_edges, 0, config.tot_corners, config.tot_faces);
BKE_id_material_eval_ensure_default_slot(&mesh->id); BKE_id_material_eval_ensure_default_slot(&mesh->id);
MutableSpan<float3> positions = mesh->vert_positions_for_write(); MutableSpan<float3> positions = mesh->vert_positions_for_write();
MutableSpan<MEdge> edges = mesh->edges_for_write(); MutableSpan<MEdge> edges = mesh->edges_for_write();
MutableSpan<MPoly> polys = mesh->polys_for_write(); MutableSpan<MPoly> polys = mesh->polys_for_write();
MutableSpan<MLoop> loops = mesh->loops_for_write();
calculate_cone_verts(config, positions); calculate_cone_verts(config, positions);
calculate_cone_edges(config, edges); calculate_cone_edges(config, edges);
calculate_cone_faces(config, loops, polys); calculate_cone_faces(
config, mesh->corner_verts_for_write(), mesh->corner_edges_for_write(), polys);
if (attribute_outputs.uv_map_id) { if (attribute_outputs.uv_map_id) {
calculate_cone_uvs(config, mesh, attribute_outputs.uv_map_id.get()); calculate_cone_uvs(config, mesh, attribute_outputs.uv_map_id.get());
} }
calculate_selection_outputs(config, attribute_outputs, mesh->attributes_for_write()); calculate_selection_outputs(config, attribute_outputs, mesh->attributes_for_write());
mesh->loose_edges_tag_none(); mesh->loose_edges_tag_none();
return mesh; return mesh;
▲ Show 20 Lines • Show All 92 Lines • Show Last 20 Lines