Change Details

**System Information** Operating system: Windows-10-10.0.22000-SP0 64 Bits Graphics card: Radeon (TM) RX 480 Graphics ATI Technologies Inc. 4.5.14760 Core Profile Context 20.45.37.01 27.20.14537.1001 **Blender Version** Broken: 2.83, 3.2.0 Worked: Apparently never **Short description of error** Considering only `Object Mode`, in the keymap there are currently three places setting the {key LMB} selection shortcut: # {nav 3D View > 3D View (Global) > Selection} # {nav 3D View > Object Mode > 3D View Tool: Tweak > Selection} # {nav 3D View > Object Mode > 3D View Tool: Tweak (fallback) > Selection} Respectively each of them can be tested by pressing {key LMB} in the 3D View under the following conditions: # Always mapped # Mapped when `Tweak Selection Tool` is enabled (between selection tools) # Mapped when fallback selection is `Tweak` and the `Selection Tool` is not enabled The problem is that, in any case, the key item of item 1 is always mapped resulting in `view3d.select` being called multiple times (since this operator is pass though). NOTE: this is not a problem for undo as an undo step is only added when something changes. **Exact steps for others to reproduce the error** - Make sure to use keymap with LMB selection **Testing the Selection Tool Shortcut:** - In the 3D view, activate the `Tweak` selection tool - In the keymap, go to {nav 3D View > Object Mode > 3D View Tool: Tweak > Selection} and disable the option `Deselect On Nothing` - In the 3d View, select the Cube and then click on an empty region - Note that the Cube has been deselected which is wrong - In the keymap, go to {nav 3D View > 3D View (Global) > Selection} and disable the option `Deselect On Nothing` - In the 3d View, select the Cube and then click on an empty region - Note that the Cube has **not** been deselected which is correct. **Testing the Selection Fallback Shortcut:** - Re-enable all `Deselect On Nothing` options and now disable the option located in {nav 3D View > Object Mode > 3D View Tool: Tweak (fallback) > Selection} - In the 3D View, activate a tool other than the selection tool (so the selection fallback will be used) - select the Cube and then click on an empty region - Note that the Cube has been deselected which is wrong Repeat the last two steps of the selection test with the tool to get the expected result.

**System Information** Operating system: Windows-10-10.0.22000-SP0 64 Bits Graphics card: Radeon (TM) RX 480 Graphics ATI Technologies Inc. 4.5.14760 Core Profile Context 20.45.37.01 27.20.14537.1001 **Blender Version** Broken: 2.83, 3.2.0 Worked: Apparently never **Short description of error** In the left-click selection settings, considering only `Object Mode` in the keymap, there are currently 3 places setting the {key LMB} selection shortcut: 1. {nav 3D View > 3D View (Global) > Selection} 2. {nav 3D View > Object Mode > 3D View Tool: Tweak > Selection} 3. {nav 3D View > Object Mode > 3D View Tool: Tweak (fallback) > Selection} Respectively each of them can be tested by pressing {key LMB} in the `3D View` under the following conditions: 1. Always active 2. Active when `Tweak Selection Tool` is enabled (between selection tools) 3. Active when fallback selection is `Tweak` and the `Selection Tool` is not enabled The problem is that, in the cases `2` and `3`, the key item of `1` is also mapped resulting in `view3d.select` being called 2 times (since this operator is pass though). This can be a problem for users editing the settings as they need to make sure the properties of both calls are "compatible". NOTE: for undo, with the default settings, this is not a problem as an undo step is only added when something changes. **Exact steps for others to reproduce the error** - Make sure to use keymap with LMB selection **Testing the Selection Tool Shortcut:** - In the 3D view, activate the `Tweak` selection tool - In the keymap, go to {nav 3D View > Object Mode > 3D View Tool: Tweak > Selection} and disable the option `Deselect On Nothing` - In the 3d View, select the Cube and then click on an empty region - Note that the Cube has been deselected which is wrong - In the keymap, go to {nav 3D View > 3D View (Global) > Selection} and disable the option `Deselect On Nothing` - In the 3d View, select the Cube and then click on an empty region - Note that the Cube has **not** been deselected which is correct. **Testing the Selection Fallback Shortcut:** - Re-enable all `Deselect On Nothing` options and now disable the option located in {nav 3D View > Object Mode > 3D View Tool: Tweak (fallback) > Selection} - In the 3D View, activate a tool other than the selection tool (so the selection fallback will be used) - select the Cube and then click on an empty region - Note that the Cube has been deselected which is wrong Repeat the last two steps of the selection test with the tool to get the expected result.

**System Information** Operating system: Windows-10-10.0.22000-SP0 64 Bits Graphics card: Radeon (TM) RX 480 Graphics ATI Technologies Inc. 4.5.14760 Core Profile Context 20.45.37.01 27.20.14537.1001 **Blender Version** Broken: 2.83, 3.2.0 Worked: Apparently never **Short description of error** CIn the left-click selection settings, considering only `Object Mode` in the keymap, in the keymap there are currently three3 places setting the {key LMB} selection shortcut: #1. {nav 3D View > 3D View (Global) > Selection} #2. {nav 3D View > Object Mode > 3D View Tool: Tweak > Selection} #3. {nav 3D View > Object Mode > 3D View Tool: Tweak (fallback) > Selection} Respectively each of them can be tested by pressing {key LMB} in the `3D View` under the following conditions: #1. Always mappedactive # Mapped2. Active when `Tweak Selection Tool` is enabled (between selection tools) # Mapped3. Active when fallback selection is `Tweak` and the `Selection Tool` is not enabled The problem is that, in anyin the cases `2` and `3`, the key item of item 1`1` is alwaysso mapped resulting in `view3d.select` being called multiple2 times (since this operator is pass though). NOTE:This can be a problem for users editing the settings as they need to make sure the properties of both calls are "compatible". NOTE: for undo, with the default settings, this is not a problem for undo as an undo step is only added when something changes. **Exact steps for others to reproduce the error** - Make sure to use keymap with LMB selection **Testing the Selection Tool Shortcut:** - In the 3D view, activate the `Tweak` selection tool - In the keymap, go to {nav 3D View > Object Mode > 3D View Tool: Tweak > Selection} and disable the option `Deselect On Nothing` - In the 3d View, select the Cube and then click on an empty region - Note that the Cube has been deselected which is wrong - In the keymap, go to {nav 3D View > 3D View (Global) > Selection} and disable the option `Deselect On Nothing` - In the 3d View, select the Cube and then click on an empty region - Note that the Cube has **not** been deselected which is correct. **Testing the Selection Fallback Shortcut:** - Re-enable all `Deselect On Nothing` options and now disable the option located in {nav 3D View > Object Mode > 3D View Tool: Tweak (fallback) > Selection} - In the 3D View, activate a tool other than the selection tool (so the selection fallback will be used) - select the Cube and then click on an empty region - Note that the Cube has been deselected which is wrong Repeat the last two steps of the selection test with the tool to get the expected result.