**System Information**
Operating system and graphics card
Debian 7.6 (wheezy) 64-bit
Kernal Linux 3.2.0-4-amd64
31: PCI 105.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
Unique ID: ul7N.fqdkMh7f9M7
Parent ID: vSkL.QA_hbVWU301
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0
SysFS BusID: 0000:01:05.0
Hardware Class: graphics card
Model: "ATI RS780M/RS780MN [Radeon HD 3200 Graphics]"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x9612 "RS780M/RS780MN [Radeon HD 3200 Graphics]"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30fc
Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
I/O Ports: 0x7000-0x7fff (rw)
Memory Range: 0xd2400000-0xd240ffff (rw,non-prefetchable)
Memory Range: 0xd2300000-0xd23fffff (rw,non-prefetchable)
IRQ: 18 (21718 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d00009612sv0000103Csd000030FCbc03sc00i00"
Driver Info #0:
Driver Status: radeon is active
Driver Activation Cmd: "modprobe radeon"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #9 (PCI bridge)
**Blender Version**
Broken: (example: blender 2.69 & 2.73)
Worked: blender 2.49 ?
The wire-frame method of display is visible in 3D Viewport.
The solid method of display is not visible in 3D Viewport.
**Exact steps for others to reproduce the error**
Simply toggle between wireframe and solid method z key of default startup.
Note: blender-softwaregl works fine so assume it's the driver.